You can't dial out using a network card because the network card is not the
same as a modem. With your configuration, the DSL Modem is what initiates
connection with your ISP. The network card gets an IP address from the DSL
Modem (after it connects with the ISP). Check with your ISP to see if you
are setup with a Dynamic IP or Static IP? If Dynamic, you won't need to
configure much on your side, if Static... you will need to configure atleast
the DSL modem and enable the DHCP function.
"Jay" <(E-Mail Removed)> wrote in message
news:025001c3a712$74e37720$(E-Mail Removed)...
> Ethernet card does not show in dial up netwoek selector,
> only the modem card shows up. Working in Germany and
> using T-Online service with analog DSL. Netcard is linked
> to Telekom's modem, but can't use it because can't dial
> via the ethernet card. Any help is appreciated.
>
> Thanks
|