DSL G604T firmware upgrade cock-up

In the upgrade instruction is says to flash the 'fs' file 1st and then
flash the 'kernel' file. I managed to do these the wrong way round
(stoopid I know) and now I can't connect to the admin pages - in fact
it wont work at all.

HELLLLLPPPPP !!!

Any way to reset / reflash at all, or will I need to ship it back for
resetting?

Any and all info gratefully received.

Alfie.

disconect power cable

press RESET BUTTON

connect power cable

wait 10 seconds

depress RESET BUTTON

> disconect power cable
>
> press RESET BUTTON
>
> connect power cable
>
> wait 10 seconds
>
> depress RESET BUTTON
>


Doesn't press and depress mean the same, and you meant release?

Or am I being a pedantic bore.

Sorry!


Graham.

On Sat, 23 Oct 2004 19:49:10 +0100, "Graham" <(E-Mail Removed)> wrote:

>
>
>> disconect power cable
>>
>> press RESET BUTTON
>>
>> connect power cable
>>
>> wait 10 seconds
>>
>> depress RESET BUTTON
>>



A thousand thanks dear sir.

:-)
Alfie

> In the upgrade instruction is says to flash the 'fs' file 1st and then
> flash the 'kernel' file. I managed to do these the wrong way round
> (stoopid I know) and now I can't connect to the admin pages - in fact
> it wont work at all.
>
> HELLLLLPPPPP !!!
>
> Any way to reset / reflash at all, or will I need to ship it back for
> resetting?

For the record:
-------------------------

disconect power cable

press RESET BUTTON

connect power cable

wait 10 seconds

release RESET BUTTON

:-)

silva wrote:

>>Any way to reset / reflash at all, or will I need to ship it back for
>>resetting?

> disconect power cable
> press RESET BUTTON
> connect power cable
> wait 10 seconds
> release RESET BUTTON

That will revert to factory settings, but it won't magically unflash it
back to the original firmware, it might help if the router is just in a
confused state ...