Jacqueline, while I think (and hope) that Mike M and Ron Lowe's advice will
resolve your problem, you need to be careful.
If the modem is an on-board device, on the MSI mainboard, and not a PCI card
add-in, then MSI may have their special driver, which should be obtained
from them.
While the generic driver may work well for the basic modem functions, some
special functions may require the MSI driver.
So while in the box, get the m/b model number, rev. number, etc, from the
silkscreened info near the center of the board, and compare it to the
Everest report to confirm, in the event this info is needed now or later.
HTH,
--
Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
Help us help you:
http://www.dts-L.org/goodpost.htm
In Memorium: Alex Nichol
http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
Your cooperation is very appreciated.
------
"Jacqueline MacWhirter" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Hi Ron: Thank you too for replying so quickly I will do that also. I
used
> Everest - that is what it came up with I was able to get all the correct
> drivers for his computer ( the mother board is MSI ) except that modem
but
> I think I will pop the case open and check the modem's manufacturer and
> number just incase , I found that program quite reliable Jackie
>
> "Ron Lowe" <ron-msng@{d.e.l.e.t.e}lowe-family.me.uk> wrote in message
> news:%(E-Mail Removed)...
> >
> > "Jacqueline" <(E-Mail Removed)> wrote in message
> > news:4FE06DC1-3E73-4BC6-A970-(E-Mail Removed)...
> >>> Hi I need a driver for a Harmonics HCF 56K Modem I have looked and
> >>> cannot
> >>> find a driver . The operating system is Windows Me. IS there a
gerneric
> >>> alternate I could use? I certainly could use the help thank you so
much
> >>> Jacqueline MacWhirter
> >
> >>http://www.conexant.com/support/ Click the link
> >>Modem Driver assistance, click the Agree button to agree to their terms
> >
> >
> > In addition to what Mike said, there's a useful
> > List Modem Identification utility on that page too.
> >
> > It can help point to the original manufacturer,
> > where you might be able to get the proper drivers.
> >
> > I've used it several times with good results.
> >
> > --
> > Ron
> >