does MagicLAN AP play with mrtg? / SNMP

Hi,

Has anyone used MRTG to monitor a Wireless Access Point?

Samsung only Ships Windows Software with this one, and
it seems that one cannot perform a SNMP walk. It always
times out here.

Is this intentional? in order to keep their SNMP ¨vendor specific¨?

I hope to be wrong... But with a cisco router, a SNMP walk is
just easy.

Thanks,
Nelson.-

www:/usr/local/mrtg-2/bin# snmpwalk -v1 10.0.0.3 public -t 30
system.sysDescr.0 = MagicLAN 11Mbps AP
system.sysObjectID.0 = OID: enterprises.1088.1
system.sysUpTime.0 = Timeticks: (2374200) 6:35:42.00
system.sysContact.0 = System Operator
system.sysName.0 = MagicLAN 11Mbps AP
system.sysLocation.0 = Samsung, Korea
system.sysServices.0 = 79
interfaces.ifNumber.0 = 3
interfaces.ifTable.ifEntry.ifIndex.1 = 1
interfaces.ifTable.ifEntry.ifIndex.2 = 2
interfaces.ifTable.ifEntry.ifIndex.6 = 6
interfaces.ifTable.ifEntry.ifDescr.1 = eth0
interfaces.ifTable.ifEntry.ifDescr.2 = wlan0
interfaces.ifTable.ifEntry.ifDescr.6 = pNA+ Loopback Driver
interfaces.ifTable.ifEntry.ifType.1 = ethernetCsmacd(6)
interfaces.ifTable.ifEntry.ifType.2 = ieee80211(71)
interfaces.ifTable.ifEntry.ifType.6 = softwareLoopback(24)
interfaces.ifTable.ifEntry.ifMtu.1 = 1500
interfaces.ifTable.ifEntry.ifMtu.2 = 2312
interfaces.ifTable.ifEntry.ifMtu.6 = 1536