How do you rollback the drivers for the MN500 routers?

This new update is causing too many problems. How do I
roll back the drivers for my base station?

Well first off the MN-500 doesn't have any drivers. Only the MN-110,
MN-120, MN-130, MN-510, MN-520, MN-710, MN-720, & MN-730 have driver files.

So I'm going to assume you mean the firmware version of the MN-500.

To roll that back you will need to have a copy of the manual update for
the version you want to install. Once you have that you just sign into
the BSMT & install the update from there.

Mike wrote:
> This new update is causing too many problems. How do I
> roll back the drivers for my base station?

Ah yes, that is what I meant. Where can one find old
firmware revisions?


>-----Original Message-----
>Well first off the MN-500 doesn't have any drivers.
Only the MN-110,
>MN-120, MN-130, MN-510, MN-520, MN-710, MN-720, & MN-730
have driver files.
>
>So I'm going to assume you mean the firmware version of
the MN-500.
>
>To roll that back you will need to have a copy of the
manual update for
>the version you want to install. Once you have that you
just sign into
>the BSMT & install the update from there.
>
>Mike wrote:
>> This new update is causing too many problems. How do
I
>> roll back the drivers for my base station?
>
>.
>

If you contact the support numbers listed at the back of your manual, they
can send you instructions on where to get older firmware revisions for the
MN500.

--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

<(E-Mail Removed)> wrote in message
news:04f401c48cd3$b8e24080$(E-Mail Removed)...
> Ah yes, that is what I meant. Where can one find old
> firmware revisions?
>
>
>>-----Original Message-----
>>Well first off the MN-500 doesn't have any drivers.
> Only the MN-110,
>>MN-120, MN-130, MN-510, MN-520, MN-710, MN-720, & MN-730
> have driver files.
>>
>>So I'm going to assume you mean the firmware version of
> the MN-500.
>>
>>To roll that back you will need to have a copy of the
> manual update for
>>the version you want to install. Once you have that you
> just sign into
>>the BSMT & install the update from there.
>>
>>Mike wrote:
>>> This new update is causing too many problems. How do
> I
>>> roll back the drivers for my base station?
>>
>>.
>>

Would they also have the older BNU versions? For
example, the same version that came with the MN500 base
station on the cd?

>-----Original Message-----
>If you contact the support numbers listed at the back of
your manual, they
>can send you instructions on where to get older firmware
revisions for the
>MN500.
>
>--
>Jason Tsang - Microsoft MVP
>
>Find out about the MS MVP Program -
>http://mvp.support.microsoft.com/default.aspx
>
><(E-Mail Removed)> wrote in message
>news:04f401c48cd3$b8e24080$(E-Mail Removed)...
>> Ah yes, that is what I meant. Where can one find old
>> firmware revisions?
>>
>>
>>>-----Original Message-----
>>>Well first off the MN-500 doesn't have any drivers.
>> Only the MN-110,
>>>MN-120, MN-130, MN-510, MN-520, MN-710, MN-720, & MN-
730
>> have driver files.
>>>
>>>So I'm going to assume you mean the firmware version of
>> the MN-500.
>>>
>>>To roll that back you will need to have a copy of the
>> manual update for
>>>the version you want to install. Once you have that
you
>> just sign into
>>>the BSMT & install the update from there.
>>>
>>>Mike wrote:
>>>> This new update is causing too many problems. How do
>> I
>>>> roll back the drivers for my base station?
>>>
>>>.
>>>
>
>
>.
>