how do i stop LCP errors with my modem-router?

I frequently see errors such as below in my Netgear DG834N router logs
when I connect to Demon's (up to) 8Mbps broadband. Anybody any ideas
where the problem is, what I need to tweak or whether it's a Demon
problem? It's annoying since when these events occur the connection
stutters and drops connections to any other machines I may be
connected to? I've checked my router's settings against the info from
Demon and it all seems correct.

Thanks, Michael

Sat, 2000-01-01 01:00:21 - Initialize LCP.
Sat, 2000-01-01 01:00:21 - LCP is allowed to come up.
Sat, 2000-01-01 01:00:25 - CHAP authentication success
Sat, 2000-01-01 01:00:33 - Send out NTP request to time-g.netgear.com
Thu, 2007-08-16 08:55:04 - Receive NTP Reply from time-g.netgear.com
Thu, 2007-08-16 08:54:30 - Router start up
Thu, 2007-08-16 09:41:09 - Administrator login successful - IP:
192.168.0.2
Thu, 2007-08-16 09:45:10 - LCP down.
Thu, 2007-08-16 09:45:11 - Initialize LCP.
Thu, 2007-08-16 09:45:11 - LCP is allowed to come up.
Thu, 2007-08-16 09:45:17 - CHAP authentication success
Thu, 2007-08-16 09:50:50 - Administrator login successful - IP:
192.168.0.2

michael <(E-Mail Removed)> wrote:

> I frequently see errors such as below in my Netgear DG834N router logs
> when I connect to Demon's (up to) 8Mbps broadband.

Are you logging into the router admin every time you connect? You shouldn't
need to..

> Thu, 2007-08-16 08:54:30 - Router start up
> Thu, 2007-08-16 09:41:09 - Administrator login successful - IP:
> Thu, 2007-08-16 09:45:17 - CHAP authentication success
> Thu, 2007-08-16 09:50:50 - Administrator login successful - IP:

It seems to be dropping the line after you login, which may be perfectly
normal on a Netgear - I've only set one up and it did act a bit strangely.
Don't think it's a problem with Demon, but if you are getting frequent line
resyncs maybe something with your line.

--
Jamin @ Home: Chester UK -<(E-Mail Removed)>