how do I install icsharep?

I'm trying to get ICS installed and keep getting the
following message:

'Internet Connection Sharing must have ICSHAREP installed.'

I've got an ME machine connected to internet via NIC and
cable modem, and also connected to home network via NIC
and hub.

I've played around a bit adding and removing protocols (my
set-up doesn't find the inf files for TCP/IP, netbeui etc
in C:\windows\inf even when they are there. I have to put
them in a temp directory to do this.) and clearing out
registry settings.

Is there a way to get my system to install the seemign ly
mising icsharep (e.g. registry hack on HKLM\enum\network)?

Or is it a problem with my network cards (they're both
NDIS 3 I think)

Any thoughts?

Jonathan

Have you installed ICS from Add/Remove Programs|Windows
Setup|Communications??

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
or
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp
"Jonathan" <(E-Mail Removed)> wrote in message
news:1888b01c44a7c$65b0c420$(E-Mail Removed)...
> I'm trying to get ICS installed and keep getting the
> following message:
>
> 'Internet Connection Sharing must have ICSHAREP installed.'
>
> I've got an ME machine connected to internet via NIC and
> cable modem, and also connected to home network via NIC
> and hub.
>
> I've played around a bit adding and removing protocols (my
> set-up doesn't find the inf files for TCP/IP, netbeui etc
> in C:\windows\inf even when they are there. I have to put
> them in a temp directory to do this.) and clearing out
> registry settings.
>
> Is there a way to get my system to install the seemign ly
> mising icsharep (e.g. registry hack on HKLM\enum\network)?
>
> Or is it a problem with my network cards (they're both
> NDIS 3 I think)
>
> Any thoughts?
>
> Jonathan

Yes. That's when I get the error message. (usually just
before Home Networking Wizard runs)

I also get it when I run the Home Networking Wizard
subsequently.

Jonathan

>-----Original Message-----
>Have you installed ICS from Add/Remove Programs|Windows
>Setup|Communications??
>
>--
>Noel Paton (MS-MVP 2002-2004, Win9x)
>
>Nil Carborundum Illegitemi
>http://www.btinternet.com/~winnoel/millsrpch.htm
>
>Please read http://dts-l.org/goodpost.htm on how to post
messages to NG's
>or
>http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
>"Jonathan" <(E-Mail Removed)> wrote in
message
>news:1888b01c44a7c$65b0c420$(E-Mail Removed)...
>> I'm trying to get ICS installed and keep getting the
>> following message:
>>
>> 'Internet Connection Sharing must have ICSHAREP
installed.'
>>
>> I've got an ME machine connected to internet via NIC and
>> cable modem, and also connected to home network via NIC
>> and hub.
>>
>> I've played around a bit adding and removing protocols
(my
>> set-up doesn't find the inf files for TCP/IP, netbeui
etc
>> in C:\windows\inf even when they are there. I have to
put
>> them in a temp directory to do this.) and clearing out
>> registry settings.
>>
>> Is there a way to get my system to install the seemign
ly
>> mising icsharep (e.g. registry hack on
HKLM\enum\network)?
>>
>> Or is it a problem with my network cards (they're both
>> NDIS 3 I think)
>>
>> Any thoughts?
>>
>> Jonathan
>
>
>.
>

My first inclination would be to uninstall ICS from Add/Remove, then
reinstall it again, and see if that clears the error *during the install* -
if not, then uninstall, replace the INF from the CAB files, and repeat.

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
or
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp
"Jonathan" <(E-Mail Removed)> wrote in message
news:186ec01c44a83$783fe100$(E-Mail Removed)...
> Yes. That's when I get the error message. (usually just
> before Home Networking Wizard runs)
>
> I also get it when I run the Home Networking Wizard
> subsequently.
>
> Jonathan
>
> >-----Original Message-----
> >Have you installed ICS from Add/Remove Programs|Windows
> >Setup|Communications??
> >
> >--
> >Noel Paton (MS-MVP 2002-2004, Win9x)
> >
> >Nil Carborundum Illegitemi
> >http://www.btinternet.com/~winnoel/millsrpch.htm
> >
> >Please read http://dts-l.org/goodpost.htm on how to post
> messages to NG's
> >or
> >http://www.microsoft.com/presspass/f...2001/Mar01/Mar
> 27pmvp.asp
> >"Jonathan" <(E-Mail Removed)> wrote in
> message
> >news:1888b01c44a7c$65b0c420$(E-Mail Removed)...
> >> I'm trying to get ICS installed and keep getting the
> >> following message:
> >>
> >> 'Internet Connection Sharing must have ICSHAREP
> installed.'
> >>
> >> I've got an ME machine connected to internet via NIC and
> >> cable modem, and also connected to home network via NIC
> >> and hub.
> >>
> >> I've played around a bit adding and removing protocols
> (my
> >> set-up doesn't find the inf files for TCP/IP, netbeui
> etc
> >> in C:\windows\inf even when they are there. I have to
> put
> >> them in a temp directory to do this.) and clearing out
> >> registry settings.
> >>
> >> Is there a way to get my system to install the seemign
> ly
> >> mising icsharep (e.g. registry hack on
> HKLM\enum\network)?
> >>
> >> Or is it a problem with my network cards (they're both
> >> NDIS 3 I think)
> >>
> >> Any thoughts?
> >>
> >> Jonathan
> >
> >
> >.
> >

I've done your 'first inclination' (but deleting ICSharing
registry key prior to the uninstall). (I'm less sure I've
done it w/o doing the registry edit, however.)

I think I've done the second ... I know I recently
extracted the inf to a temp directory and then compared
contents with one in C:\windows\inf using a file compare
utility and they were exactly the same!

I may try these one more time, but do you have any other
ideas in the mean time?

Jonathan

PS ask me any details about my setup that you like


>-----Original Message-----
>My first inclination would be to uninstall ICS from
Add/Remove, then
>reinstall it again, and see if that clears the error
*during the install* -
>if not, then uninstall, replace the INF from the CAB
files, and repeat.
>
>--
>Noel Paton (MS-MVP 2002-2004, Win9x)
>
>Nil Carborundum Illegitemi
>http://www.btinternet.com/~winnoel/millsrpch.htm
>
>Please read http://dts-l.org/goodpost.htm on how to post
messages to NG's
>or
>http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
>"Jonathan" <(E-Mail Removed)> wrote in
message
>news:186ec01c44a83$783fe100$(E-Mail Removed)...
>> Yes. That's when I get the error message. (usually just
>> before Home Networking Wizard runs)
>>
>> I also get it when I run the Home Networking Wizard
>> subsequently.
>>
>> Jonathan
>>
>> >-----Original Message-----
>> >Have you installed ICS from Add/Remove Programs|Windows
>> >Setup|Communications??
>> >
>> >--
>> >Noel Paton (MS-MVP 2002-2004, Win9x)
>> >
>> >Nil Carborundum Illegitemi
>> >http://www.btinternet.com/~winnoel/millsrpch.htm
>> >
>> >Please read http://dts-l.org/goodpost.htm on how to
post
>> messages to NG's
>> >or
>>
>http://www.microsoft.com/presspass/f...2001/Mar01/Mar
>> 27pmvp.asp
>> >"Jonathan" <(E-Mail Removed)> wrote
in
>> message
>> >news:1888b01c44a7c$65b0c420$(E-Mail Removed)...
>> >> I'm trying to get ICS installed and keep getting the
>> >> following message:
>> >>
>> >> 'Internet Connection Sharing must have ICSHAREP
>> installed.'
>> >>
>> >> I've got an ME machine connected to internet via NIC
and
>> >> cable modem, and also connected to home network via
NIC
>> >> and hub.
>> >>
>> >> I've played around a bit adding and removing
protocols
>> (my
>> >> set-up doesn't find the inf files for TCP/IP, netbeui
>> etc
>> >> in C:\windows\inf even when they are there. I have to
>> put
>> >> them in a temp directory to do this.) and clearing
out
>> >> registry settings.
>> >>
>> >> Is there a way to get my system to install the
seemign
>> ly
>> >> mising icsharep (e.g. registry hack on
>> HKLM\enum\network)?
>> >>
>> >> Or is it a problem with my network cards (they're
both
>> >> NDIS 3 I think)
>> >>
>> >> Any thoughts?
>> >>
>> >> Jonathan
>> >
>> >
>> >.
>> >
>
>
>.
>

Why play with the registry? - that's what install/uninstall routines are
for!! (at least in theory<g>)

File compares can be fooled -or you may be looking at the wrong copy of the
file!

You don't need NetBeui, whatever else you might need - so forget it (and it
can cause problems).

Have you made sure that you have the correct driver installed for the
network cards (i.e. does the network run OK until you install ICS??)

You *may* have 'version soup' - have you reinstalled ME over itself from the
CD at any point?

Have you had a virus infection? - what's your AV??


--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
or
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp
"Jonathan" <(E-Mail Removed)> wrote in message
news:1870801c44a86$76cd5de0$(E-Mail Removed)...
> I've done your 'first inclination' (but deleting ICSharing
> registry key prior to the uninstall). (I'm less sure I've
> done it w/o doing the registry edit, however.)
>
> I think I've done the second ... I know I recently
> extracted the inf to a temp directory and then compared
> contents with one in C:\windows\inf using a file compare
> utility and they were exactly the same!
>
> I may try these one more time, but do you have any other
> ideas in the mean time?
>
> Jonathan
>
> PS ask me any details about my setup that you like
>
>
> >-----Original Message-----
> >My first inclination would be to uninstall ICS from
> Add/Remove, then
> >reinstall it again, and see if that clears the error
> *during the install* -
> >if not, then uninstall, replace the INF from the CAB
> files, and repeat.
> >
> >--
> >Noel Paton (MS-MVP 2002-2004, Win9x)
> >
> >Nil Carborundum Illegitemi
> >http://www.btinternet.com/~winnoel/millsrpch.htm
> >
> >Please read http://dts-l.org/goodpost.htm on how to post
> messages to NG's
> >or
> >http://www.microsoft.com/presspass/f...2001/Mar01/Mar
> 27pmvp.asp
> >"Jonathan" <(E-Mail Removed)> wrote in
> message
> >news:186ec01c44a83$783fe100$(E-Mail Removed)...
> >> Yes. That's when I get the error message. (usually just
> >> before Home Networking Wizard runs)
> >>
> >> I also get it when I run the Home Networking Wizard
> >> subsequently.
> >>
> >> Jonathan
> >>
> >> >-----Original Message-----
> >> >Have you installed ICS from Add/Remove Programs|Windows
> >> >Setup|Communications??
> >> >
> >> >--
> >> >Noel Paton (MS-MVP 2002-2004, Win9x)
> >> >
> >> >Nil Carborundum Illegitemi
> >> >http://www.btinternet.com/~winnoel/millsrpch.htm
> >> >
> >> >Please read http://dts-l.org/goodpost.htm on how to
> post
> >> messages to NG's
> >> >or
> >>
> >http://www.microsoft.com/presspass/f...2001/Mar01/Mar
> >> 27pmvp.asp
> >> >"Jonathan" <(E-Mail Removed)> wrote
> in
> >> message
> >> >news:1888b01c44a7c$65b0c420$(E-Mail Removed)...
> >> >> I'm trying to get ICS installed and keep getting the
> >> >> following message:
> >> >>
> >> >> 'Internet Connection Sharing must have ICSHAREP
> >> installed.'
> >> >>
> >> >> I've got an ME machine connected to internet via NIC
> and
> >> >> cable modem, and also connected to home network via
> NIC
> >> >> and hub.
> >> >>
> >> >> I've played around a bit adding and removing
> protocols
> >> (my
> >> >> set-up doesn't find the inf files for TCP/IP, netbeui
> >> etc
> >> >> in C:\windows\inf even when they are there. I have to
> >> put
> >> >> them in a temp directory to do this.) and clearing
> out
> >> >> registry settings.
> >> >>
> >> >> Is there a way to get my system to install the
> seemign
> >> ly
> >> >> mising icsharep (e.g. registry hack on
> >> HKLM\enum\network)?
> >> >>
> >> >> Or is it a problem with my network cards (they're
> both
> >> >> NDIS 3 I think)
> >> >>
> >> >> Any thoughts?
> >> >>
> >> >> Jonathan
> >> >
> >> >
> >> >.
> >> >
> >
> >
> >.
> >

Responses below!

Thanks

Jonathan

>-----Original Message-----
>Why play with the registry? - that's what
install/uninstall routines are
>for!! (at least in theory<g>)

J: Indeed! It seems to me (IMHO) that one or more install
routine ain't working, 'cos icsharep isn't getting
installed.

>File compares can be fooled -or you may be looking at the
wrong copy of the file!

J: I use Beyond Compare, which is pretty good. Allows you
to compare files in a file explorer view and then contents
of two files side-by-side. Use it all the time at work
(multimedia/web development).

>You don't need NetBeui, whatever else you might need - so
forget it (and it can cause problems).

J: I don't have it installed, but installed it and
uninstalled it as part of a set of steps recommended to
fix problems with netconn (on practicallynetworked.com and
homenethelp.com amongst others)

>Have you made sure that you have the correct driver
installed for the network cards (i.e. does the network run
OK until you install ICS??)

J: Yes. I believe I have correct and latest manufacturers
drivers (as opposed to microsoft) and both cable modem
connection and home network work ok and at the same time.

>You *may* have 'version soup' - have you reinstalled ME
over itself from the CD at any point?

J: I've never reinstalled.

>Have you had a virus infection? - what's your AV??

J: not been infected as far as I know. I have Norton AV as
part of Norton Internet security. Been running since Jan
2002 (and I've upgraded to 2003 and 2004 edition)

J: One final thing. I had a similar problem trying to set-
up VPN a couple of years ago. This was before I put a
network card in the machine and was accessing internet via
dialup. When trying to install VPN I kept getting a
message about NDISWAN not being installed, and the MS VPN
adapter wouldn't appear in network properties (just as ICS
adapter and protocols don't appear in network properties
when I install it now)


-------------
end of new stuff!

>
>--
>Noel Paton (MS-MVP 2002-2004, Win9x)
>
>Nil Carborundum Illegitemi
>http://www.btinternet.com/~winnoel/millsrpch.htm
>
>Please read http://dts-l.org/goodpost.htm on how to post
messages to NG's
>or
>http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
>"Jonathan" <(E-Mail Removed)> wrote in
message
>news:1870801c44a86$76cd5de0$(E-Mail Removed)...
>> I've done your 'first inclination' (but deleting
ICSharing
>> registry key prior to the uninstall). (I'm less sure
I've
>> done it w/o doing the registry edit, however.)
>>
>> I think I've done the second ... I know I recently
>> extracted the inf to a temp directory and then compared
>> contents with one in C:\windows\inf using a file compare
>> utility and they were exactly the same!
>>
>> I may try these one more time, but do you have any other
>> ideas in the mean time?
>>
>> Jonathan
>>
>> PS ask me any details about my setup that you like
>>
>>
>> >-----Original Message-----
>> >My first inclination would be to uninstall ICS from
>> Add/Remove, then
>> >reinstall it again, and see if that clears the error
>> *during the install* -
>> >if not, then uninstall, replace the INF from the CAB
>> files, and repeat.
>> >
>> >--
>> >Noel Paton (MS-MVP 2002-2004, Win9x)
>> >
>> >Nil Carborundum Illegitemi
>> >http://www.btinternet.com/~winnoel/millsrpch.htm
>> >
>> >Please read http://dts-l.org/goodpost.htm on how to
post
>> messages to NG's
>> >or
>>
>http://www.microsoft.com/presspass/f...2001/Mar01/Mar
>> 27pmvp.asp
>> >"Jonathan" <(E-Mail Removed)> wrote
in
>> message
>> >news:186ec01c44a83$783fe100$(E-Mail Removed)...
>> >> Yes. That's when I get the error message. (usually
just
>> >> before Home Networking Wizard runs)
>> >>
>> >> I also get it when I run the Home Networking Wizard
>> >> subsequently.
>> >>
>> >> Jonathan
>> >>
>> >> >-----Original Message-----
>> >> >Have you installed ICS from Add/Remove
Programs|Windows
>> >> >Setup|Communications??
>> >> >
>> >> >--
>> >> >Noel Paton (MS-MVP 2002-2004, Win9x)
>> >> >
>> >> >Nil Carborundum Illegitemi
>> >> >http://www.btinternet.com/~winnoel/millsrpch.htm
>> >> >
>> >> >Please read http://dts-l.org/goodpost.htm on how to
>> post
>> >> messages to NG's
>> >> >or
>> >>
>>
>http://www.microsoft.com/presspass/f...2001/Mar01/Mar
>> >> 27pmvp.asp
>> >> >"Jonathan" <(E-Mail Removed)>
wrote
>> in
>> >> message
>> >> >news:1888b01c44a7c$65b0c420$(E-Mail Removed)...
>> >> >> I'm trying to get ICS installed and keep getting
the
>> >> >> following message:
>> >> >>
>> >> >> 'Internet Connection Sharing must have ICSHAREP
>> >> installed.'
>> >> >>
>> >> >> I've got an ME machine connected to internet via
NIC
>> and
>> >> >> cable modem, and also connected to home network
via
>> NIC
>> >> >> and hub.
>> >> >>
>> >> >> I've played around a bit adding and removing
>> protocols
>> >> (my
>> >> >> set-up doesn't find the inf files for TCP/IP,
netbeui
>> >> etc
>> >> >> in C:\windows\inf even when they are there. I
have to
>> >> put
>> >> >> them in a temp directory to do this.) and clearing
>> out
>> >> >> registry settings.
>> >> >>
>> >> >> Is there a way to get my system to install the
>> seemign
>> >> ly
>> >> >> mising icsharep (e.g. registry hack on
>> >> HKLM\enum\network)?
>> >> >>
>> >> >> Or is it a problem with my network cards (they're
>> both
>> >> >> NDIS 3 I think)
>> >> >>
>> >> >> Any thoughts?
>> >> >>
>> >> >> Jonathan

Oh - Norton
Is this the Corporate version, or Retail??

FWIW, I'd never consider attempting anything to do with system modifications
with any (Retail) Norton product installed or running - but I have been
reliably informed that the Corporate version is considerably more
OS-friendly.
Norton and ME do NOT get on - and for me, ME is more important than Norton!

WRT comparing files - you have to ensure that you're comparing the right
copies!
In my ME system (currently an ICS client - but used to be the host), I have
C:\WINDOWS\\SYSTEM\ICSHAREP.VXD dated 8th June 2000
C:\WINDOWS\INF\ICSHAREP.INF ditto
C:\WINDOWS\INF\INFBACK\ICSSHAREP.INF dated 13/3/2004

Installing ICS and rebooting....
gives the same result!

The original files are held in
PRECOPY1.CAB and WIN_20.CAB in the C:\Windows\Options branch and on the
WinME CD.
Extract the two files, and place them in the correct place, using MSCONFIG,
etc - then Install ICSHAREP.INF

See if that does the trick

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
or
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp
"Jonathan" <(E-Mail Removed)> wrote in message
news:189f701c44b44$b324f6e0$(E-Mail Removed)...
> Responses below!
>
> Thanks
>
> Jonathan
>
> >-----Original Message-----
> >Why play with the registry? - that's what
> install/uninstall routines are
> >for!! (at least in theory<g>)
>
> J: Indeed! It seems to me (IMHO) that one or more install
> routine ain't working, 'cos icsharep isn't getting
> installed.
>
> >File compares can be fooled -or you may be looking at the
> wrong copy of the file!
>
> J: I use Beyond Compare, which is pretty good. Allows you
> to compare files in a file explorer view and then contents
> of two files side-by-side. Use it all the time at work
> (multimedia/web development).
>
> >You don't need NetBeui, whatever else you might need - so
> forget it (and it can cause problems).
>
> J: I don't have it installed, but installed it and
> uninstalled it as part of a set of steps recommended to
> fix problems with netconn (on practicallynetworked.com and
> homenethelp.com amongst others)
>
> >Have you made sure that you have the correct driver
> installed for the network cards (i.e. does the network run
> OK until you install ICS??)
>
> J: Yes. I believe I have correct and latest manufacturers
> drivers (as opposed to microsoft) and both cable modem
> connection and home network work ok and at the same time.
>
> >You *may* have 'version soup' - have you reinstalled ME
> over itself from the CD at any point?
>
> J: I've never reinstalled.
>
> >Have you had a virus infection? - what's your AV??
>
> J: not been infected as far as I know. I have Norton AV as
> part of Norton Internet security. Been running since Jan
> 2002 (and I've upgraded to 2003 and 2004 edition)
>
> J: One final thing. I had a similar problem trying to set-
> up VPN a couple of years ago. This was before I put a
> network card in the machine and was accessing internet via
> dialup. When trying to install VPN I kept getting a
> message about NDISWAN not being installed, and the MS VPN
> adapter wouldn't appear in network properties (just as ICS
> adapter and protocols don't appear in network properties
> when I install it now)
>
>
> -------------
> end of new stuff!
>
> >
> >--
> >Noel Paton (MS-MVP 2002-2004, Win9x)
> >
> >Nil Carborundum Illegitemi
> >http://www.btinternet.com/~winnoel/millsrpch.htm
> >
> >Please read http://dts-l.org/goodpost.htm on how to post
> messages to NG's
> >or
> >http://www.microsoft.com/presspass/f...2001/Mar01/Mar
> 27pmvp.asp
> >"Jonathan" <(E-Mail Removed)> wrote in
> message
> >news:1870801c44a86$76cd5de0$(E-Mail Removed)...
> >> I've done your 'first inclination' (but deleting
> ICSharing
> >> registry key prior to the uninstall). (I'm less sure
> I've
> >> done it w/o doing the registry edit, however.)
> >>
> >> I think I've done the second ... I know I recently
> >> extracted the inf to a temp directory and then compared
> >> contents with one in C:\windows\inf using a file compare
> >> utility and they were exactly the same!
> >>
> >> I may try these one more time, but do you have any other
> >> ideas in the mean time?
> >>
> >> Jonathan
> >>
> >> PS ask me any details about my setup that you like
> >>
> >>
> >> >-----Original Message-----
> >> >My first inclination would be to uninstall ICS from
> >> Add/Remove, then
> >> >reinstall it again, and see if that clears the error
> >> *during the install* -
> >> >if not, then uninstall, replace the INF from the CAB
> >> files, and repeat.
> >> >
> >> >--
> >> >Noel Paton (MS-MVP 2002-2004, Win9x)
> >> >
> >> >Nil Carborundum Illegitemi
> >> >http://www.btinternet.com/~winnoel/millsrpch.htm
> >> >
> >> >Please read http://dts-l.org/goodpost.htm on how to
> post
> >> messages to NG's
> >> >or
> >>
> >http://www.microsoft.com/presspass/f...2001/Mar01/Mar
> >> 27pmvp.asp
> >> >"Jonathan" <(E-Mail Removed)> wrote
> in
> >> message
> >> >news:186ec01c44a83$783fe100$(E-Mail Removed)...
> >> >> Yes. That's when I get the error message. (usually
> just
> >> >> before Home Networking Wizard runs)
> >> >>
> >> >> I also get it when I run the Home Networking Wizard
> >> >> subsequently.
> >> >>
> >> >> Jonathan
> >> >>
> >> >> >-----Original Message-----
> >> >> >Have you installed ICS from Add/Remove
> Programs|Windows
> >> >> >Setup|Communications??
> >> >> >
> >> >> >--
> >> >> >Noel Paton (MS-MVP 2002-2004, Win9x)
> >> >> >
> >> >> >Nil Carborundum Illegitemi
> >> >> >http://www.btinternet.com/~winnoel/millsrpch.htm
> >> >> >
> >> >> >Please read http://dts-l.org/goodpost.htm on how to
> >> post
> >> >> messages to NG's
> >> >> >or
> >> >>
> >>
> >http://www.microsoft.com/presspass/f...2001/Mar01/Mar
> >> >> 27pmvp.asp
> >> >> >"Jonathan" <(E-Mail Removed)>
> wrote
> >> in
> >> >> message
> >> >> >news:1888b01c44a7c$65b0c420$(E-Mail Removed)...
> >> >> >> I'm trying to get ICS installed and keep getting
> the
> >> >> >> following message:
> >> >> >>
> >> >> >> 'Internet Connection Sharing must have ICSHAREP
> >> >> installed.'
> >> >> >>
> >> >> >> I've got an ME machine connected to internet via
> NIC
> >> and
> >> >> >> cable modem, and also connected to home network
> via
> >> NIC
> >> >> >> and hub.
> >> >> >>
> >> >> >> I've played around a bit adding and removing
> >> protocols
> >> >> (my
> >> >> >> set-up doesn't find the inf files for TCP/IP,
> netbeui
> >> >> etc
> >> >> >> in C:\windows\inf even when they are there. I
> have to
> >> >> put
> >> >> >> them in a temp directory to do this.) and clearing
> >> out
> >> >> >> registry settings.
> >> >> >>
> >> >> >> Is there a way to get my system to install the
> >> seemign
> >> >> ly
> >> >> >> mising icsharep (e.g. registry hack on
> >> >> HKLM\enum\network)?
> >> >> >>
> >> >> >> Or is it a problem with my network cards (they're
> >> both
> >> >> >> NDIS 3 I think)
> >> >> >>
> >> >> >> Any thoughts?
> >> >> >>
> >> >> >> Jonathan