Dlink Incognito

I've been trying to get a Dlink Setup server,
http://192.168.0.50 for about 8 hours with no result. Their
phone gives out such garbage messages while on hold, that I can't
bear to wait around too long. Any body having better success?

John

"John" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I've been trying to get a Dlink Setup server,
> http://192.168.0.50 for about 8 hours with no result. Their
> phone gives out such garbage messages while on hold, that I can't
> bear to wait around too long. Any body having better success?

What device, what does the settup instructions say.

My DI-614+ says to use
http://192.168.0.1

Your device may be different.

Bill

On Wed, 28 Jul 2004 11:09:30 -0700, "scram" <(E-Mail Removed)>
wrote:

>
>"John" <(E-Mail Removed)> wrote in message
>news:(E-Mail Removed).. .
>> I've been trying to get a Dlink Setup server,
>> http://192.168.0.50 for about 8 hours with no result. Their
>> phone gives out such garbage messages while on hold, that I can't
>> bear to wait around too long. Any body having better success?
>
>What device, what does the settup instructions say.
>
>My DI-614+ says to use
>http://192.168.0.1
>
>Your device may be different.
>
>Bill
>

Thanks, Bill. In my case http://192.168.0.1 works for the
DWL-824VUP, but I can not get the wizard for DWL-2100AP (attached
to the DWL-824VUP) through the recommended address
http://192.168.0.50 I can't even ping that address.

John

Are you trying from a PC on the same subnet 192.168.0.xxx ?

Guy

John wrote:
> On Wed, 28 Jul 2004 11:09:30 -0700, "scram" <(E-Mail Removed)>
> wrote:
>
>>
>> "John" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed)...
>>> I've been trying to get a Dlink Setup server,
>>> http://192.168.0.50 for about 8 hours with no result. Their
>>> phone gives out such garbage messages while on hold, that I can't
>>> bear to wait around too long. Any body having better success?
>>
>> What device, what does the settup instructions say.
>>
>> My DI-614+ says to use
>> http://192.168.0.1
>>
>> Your device may be different.
>>
>> Bill
>>
>
> Thanks, Bill. In my case http://192.168.0.1 works for the
> DWL-824VUP, but I can not get the wizard for DWL-2100AP (attached
> to the DWL-824VUP) through the recommended address
> http://192.168.0.50 I can't even ping that address.
>
> John

On Thu, 29 Jul 2004 05:51:59 GMT, "Bigguy"
<(E-Mail Removed)> wrote:

>Are you trying from a PC on the same subnet 192.168.0.xxx ?
>
>Guy
>

Yes, Guy. My Client IP is 192.168.0.xxx I am using the same
PC to access the wizard at http://192.168.0.1 AND
http://192.168.0.50 and only the first one works.

Thanks,
John



>John wrote:
>> On Wed, 28 Jul 2004 11:09:30 -0700, "scram" <(E-Mail Removed)>
>> wrote:
>>
>>>
>>> "John" <(E-Mail Removed)> wrote in message
>>> news:(E-Mail Removed)...
>>>> I've been trying to get a Dlink Setup server,
>>>> http://192.168.0.50 for about 8 hours with no result. Their
>>>> phone gives out such garbage messages while on hold, that I can't
>>>> bear to wait around too long. Any body having better success?
>>>
>>> What device, what does the settup instructions say.
>>>
>>> My DI-614+ says to use
>>> http://192.168.0.1
>>>
>>> Your device may be different.
>>>
>>> Bill
>>>
>>
>> Thanks, Bill. In my case http://192.168.0.1 works for the
>> DWL-824VUP, but I can not get the wizard for DWL-2100AP (attached
>> to the DWL-824VUP) through the recommended address
>> http://192.168.0.50 I can't even ping that address.
>>
>> John
>

"John" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> On Thu, 29 Jul 2004 05:51:59 GMT, "Bigguy"
> <(E-Mail Removed)> wrote:
>
> >Are you trying from a PC on the same subnet 192.168.0.xxx ?
> >
> >Guy
> >
>
> Yes, Guy. My Client IP is 192.168.0.xxx I am using the same
> PC to access the wizard at http://192.168.0.1 AND
> http://192.168.0.50 and only the first one works.
>
> Thanks,
> John
>
>
>
> >John wrote:
> >> On Wed, 28 Jul 2004 11:09:30 -0700, "scram" <(E-Mail Removed)>
> >> wrote:
> >>
> >>>
> >>> "John" <(E-Mail Removed)> wrote in message
> >>> news:(E-Mail Removed)...
> >>>> I've been trying to get a Dlink Setup server,
> >>>> http://192.168.0.50 for about 8 hours with no result. Their
> >>>> phone gives out such garbage messages while on hold, that I can't
> >>>> bear to wait around too long. Any body having better success?
> >>>
> >>> What device, what does the settup instructions say.
> >>>
> >>> My DI-614+ says to use
> >>> http://192.168.0.1
> >>>
> >>> Your device may be different.
> >>>
> >>> Bill
> >>>
> >>
> >> Thanks, Bill. In my case http://192.168.0.1 works for the
> >> DWL-824VUP, but I can not get the wizard for DWL-2100AP (attached
> >> to the DWL-824VUP) through the recommended address
> >> http://192.168.0.50 I can't even ping that address.
> >>
> >> John

You've probably already tried this, but I would perform a hardware reset on
the DWL-2100AP. Is the cable between the router and the AP known to be
good? Normally a straight-through cable would be used between a router's
LAN port and an AP, but it might be worthwhile to try a crossover cable.

Ron Bandes, CCNP, CTT+, etc.

On Thu, 29 Jul 2004 15:17:03 GMT, "Ron Bandes" <RunderscoreBandes
@yah00.com> wrote:

>"John" <(E-Mail Removed)> wrote in message
>news:(E-Mail Removed).. .
>> On Thu, 29 Jul 2004 05:51:59 GMT, "Bigguy"
>> <(E-Mail Removed)> wrote:
>>
>> >Are you trying from a PC on the same subnet 192.168.0.xxx ?
>> >
>> >Guy
>> >
>>
>> Yes, Guy. My Client IP is 192.168.0.xxx I am using the same
>> PC to access the wizard at http://192.168.0.1 AND
>> http://192.168.0.50 and only the first one works.
>>
>> Thanks,
>> John
>>
>>
>>
>> >John wrote:
>> >> On Wed, 28 Jul 2004 11:09:30 -0700, "scram" <(E-Mail Removed)>
>> >> wrote:
>> >>
>> >>>
>> >>> "John" <(E-Mail Removed)> wrote in message
>> >>> news:(E-Mail Removed)...
>> >>>> I've been trying to get a Dlink Setup server,
>> >>>> http://192.168.0.50 for about 8 hours with no result. Their
>> >>>> phone gives out such garbage messages while on hold, that I can't
>> >>>> bear to wait around too long. Any body having better success?
>> >>>
>> >>> What device, what does the settup instructions say.
>> >>>
>> >>> My DI-614+ says to use
>> >>> http://192.168.0.1
>> >>>
>> >>> Your device may be different.
>> >>>
>> >>> Bill
>> >>>
>> >>
>> >> Thanks, Bill. In my case http://192.168.0.1 works for the
>> >> DWL-824VUP, but I can not get the wizard for DWL-2100AP (attached
>> >> to the DWL-824VUP) through the recommended address
>> >> http://192.168.0.50 I can't even ping that address.
>> >>
>> >> John
>
>You've probably already tried this, but I would perform a hardware reset on
>the DWL-2100AP. Is the cable between the router and the AP known to be
>good? Normally a straight-through cable would be used between a router's
>LAN port and an AP, but it might be worthwhile to try a crossover cable.
>
>Ron Bandes, CCNP, CTT+, etc.
>

Thanks Ron. I did try your suggestions, except for crossover
cable, without result. Then I switched to a brand new DWL-2100AP
that I was going to use as a repeater. It connected to
http://192.168.0.50 !!??

Then, to simplify things I got a DI-604 router to replace the
DWL-824VUP, and attached the DWL-2100AP to it. That is working
OK. I have yet to see if the "defective" DWL-2100AP will work in
repeater mode.

John