Dlink G810 question...

When the G810 can't find a DHCP server, what default address does it
use? I changed the IP from static to dynamic but when it couldn't find
a DHCP server, I lost contact with the unit. Had to reset the unit and
upload firmware.

Default IP is 192.168.0.30. If you changed it to dynamic and lost comms with
it, more then likely it did recieve a IP via DHCP and you just dont know
what it is. Your DHCP server, hopefully a router, should show you all IPs
connected to it.

Robert....

<(E-Mail Removed)> wrote in message
news:(E-Mail Removed) oups.com...
> When the G810 can't find a DHCP server, what default address does it
> use? I changed the IP from static to dynamic but when it couldn't find
> a DHCP server, I lost contact with the unit. Had to reset the unit and
> upload firmware.
>

I ultimately had to abandon this bridge. Just too many problems.
Specifically I always had to reconnect the wireless connection manually
through the bridge after a few hours because it seems to just go to
sleep. I'm now using a Linksys and it purrs like a kitten! No more
issues.