Dlink G604T Access Control using Telnet

Can anyone tell me how I can Telnet into my Dlink G604T and send a command
to block/allow access to one of my P.C.'s that is connected directly to one
of the routers ports please??

Many Thanks
D

From: "Digital" <(E-Mail Removed)>

| Can anyone tell me how I can Telnet into my Dlink G604T and send a command
| to block/allow access to one of my P.C.'s that is connected directly to one
| of the routers ports please??
|
| Many Thanks
| D
|

If it supports the Telnet protocol and the IP is 192.168.1.1 then; telnet 192.168.1.1 but
it has to support Telnet. Most Routers just support http. As to blocking a particular PC,
RTFB.

--
Dave
http://www.claymania.com/removal-trojan-adware.html
http://www.ik-cs.com/got-a-virus.htm

The G604T does support Telnet and runs BusyBox Unix. I can connect via
Telnet with no problem. Unfortunately 'TFB' doesnt tell me what I need to
know. The question is more "what command do I need using Telnet, to close
down a port on my G604T or block a MAC address from using it" rather than
"Can I use Telnet". but thanks for your help.


Regards
D



"David H. Lipman" <DLipman~nospam~@Verizon.Net> wrote in message
news:my9Me.2934$Y55.1419@trnddc06...
> From: "Digital" <(E-Mail Removed)>
>
> | Can anyone tell me how I can Telnet into my Dlink G604T and send a
> command
> | to block/allow access to one of my P.C.'s that is connected directly to
> one
> | of the routers ports please??
> |
> | Many Thanks
> | D
> |
>
> If it supports the Telnet protocol and the IP is 192.168.1.1 then; telnet
> 192.168.1.1 but
> it has to support Telnet. Most Routers just support http. As to blocking
> a particular PC,
> RTFB.
>
> --
> Dave
> http://www.claymania.com/removal-trojan-adware.html
> http://www.ik-cs.com/got-a-virus.htm
>
>

From: "Digital" <(E-Mail Removed)>

| The G604T does support Telnet and runs BusyBox Unix. I can connect via
| Telnet with no problem. Unfortunately 'TFB' doesnt tell me what I need to
| know. The question is more "what command do I need using Telnet, to close
| down a port on my G604T or block a MAC address from using it" rather than
| "Can I use Telnet". but thanks for your help.
|
| Regards
| D
|

Unless the Telnet front end has a menu driven utility or a command interpreter, I doubt you
can do it with a Telnet console. If the Router is cabable, the likely solution would be
through a http GUI.

--
Dave
http://www.claymania.com/removal-trojan-adware.html
http://www.ik-cs.com/got-a-virus.htm