Dlink Firmware - is it just me?

Is it just me or has anybody else had this problem??

I have two Dlink DWL-900AP+ access points operating in bridging mode, the
firmware version 2.50 works perfectly (very few dropped packets) but the
firmware versions after 2.50 including the new 2.60 cause many dropped
packets and an unacceptable service. (around 10% dropped).

Anybody have the same problem? Does anybody know what differences in the
firmware may cause this problem?

Does anybody know if the 4X mode will ever be available for access points in
bridging mode?
--
Cheers,
Pete

"Peter Harrison" <pete001.sb@NOSPAMblueyonderDOTcoDOTuk> wrote in
news:8NO6b.3650$(E-Mail Removed):

> Is it just me or has anybody else had this problem??
>
> I have two Dlink DWL-900AP+ access points operating in bridging mode,
> the firmware version 2.50 works perfectly (very few dropped packets)
> but the firmware versions after 2.50 including the new 2.60 cause many
> dropped packets and an unacceptable service. (around 10% dropped).
>
> Anybody have the same problem? Does anybody know what differences in
> the firmware may cause this problem?
>
> Does anybody know if the 4X mode will ever be available for access
> points in bridging mode?
> --
> Cheers,
> Pete
>
>
>
/\/\/\/
Try the DLink forum at ...

http://www.dslreports.com/forum/dlink

I have a 900AP+ in service using 2.60 but it is operating as an AP and I
have no complaints.

campbell

> "Peter Harrison" <(E-Mail Removed)> wrote:
>
> > Is it just me or has anybody else had this problem??
> >
> > I have two Dlink DWL-900AP+ access points operating in bridging mode,
> > the firmware version 2.50 works perfectly (very few dropped packets)
> > but the firmware versions after 2.50 including the new 2.60 cause many
> > dropped packets and an unacceptable service. (around 10% dropped).
> >
> > Anybody have the same problem? Does anybody know what differences in
> > the firmware may cause this problem?
> >
> > Does anybody know if the 4X mode will ever be available for access
> > points in bridging mode?

I run v2.57, I had problems with the AP's flooding themselves when traffic
flowed and resetting... 4X is available with the firmware, haven't tried
them in bridging mode however... Might want to look at the FTP site
directly, if you don't see it on the website...

No, isn't just you!

I've 2 dwl-900ap+ in bridge mode and the only one firmware working
fine is 2.50.

I've tried all versions of firmware. 2.57 works very bad, > 2.50 and <
2.57 doesn't works at all (bridge impossible) and 2.60 has freezed my
ap.

"Peter Harrison" <pete001.sb@NOSPAMblueyonderDOTcoDOTuk> wrote in message news:<8NO6b.3650$(E-Mail Removed)>...
> Is it just me or has anybody else had this problem??
>
> I have two Dlink DWL-900AP+ access points operating in bridging mode, the
> firmware version 2.50 works perfectly (very few dropped packets) but the
> firmware versions after 2.50 including the new 2.60 cause many dropped
> packets and an unacceptable service. (around 10% dropped).
>
> Anybody have the same problem? Does anybody know what differences in the
> firmware may cause this problem?
>
> Does anybody know if the 4X mode will ever be available for access points in
> bridging mode?