DLink DWL-g810 + Linksys WRT54G

Hi, Im trying to bridge a wired ethernet connection to wireless using
a Dlink DWL-G810 connecting to a Linksys WRT54G Wireless AP/Router.

Problem is when it connects it works for a few seconds then comes
on/off (mostly off) then kicks off other wifi clients - I have to
physically reboot the router.

Has anyone else had this problem? Im running a non-standard firmware
on the WRT54G but that wouldnt be the issue, would it?

News User wrote:
> Hi, Im trying to bridge a wired ethernet connection to wireless using
> a Dlink DWL-G810 connecting to a Linksys WRT54G Wireless AP/Router.
>
> Problem is when it connects it works for a few seconds then comes
> on/off (mostly off) then kicks off other wifi clients - I have to
> physically reboot the router.
>
> Has anyone else had this problem? Im running a non-standard firmware
> on the WRT54G but that wouldnt be the issue, would it?

Hey,
I just figured out today how to fix this problem. What I did was
went into the D-Link G810's configuration web page on your LAN (I thin
the default is 192.168.0.30) and underneath the wireless tab there is
super g drop down menu. For me that tab was set to Disabled. Then
changed the option to super g with static turbo. This seemed to fi
the problem with the connection problem

--
strike200
http://forums.speedguide.ne

Did changing the Super-G settings really fix the problem?

I've tried to do what you say, and it makes the bridge stop causing th
AP from dropping connections, but it also makes the bridge unable t
talk to the AP at all

--
kevb
http://forums.speedguide.ne