DLINK DWL-AG700AP problem

Hi,
Has anyone experienced problems with DLINK DWL-AG700AP Access Point ?
I can browse the internet but not intranet PCs.
All my configurations seems to be ok (I posted on other forums before
this) but nobody can give me a solution!
I'll be glad to explain the problem in details (i.e. expalin exactly my
configuration) if someone will try to help me.

Thanks.

Can you ping each by IP? Or post the result of net view \\remoteIP here.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"nda" <(E-Mail Removed)> wrote in message news:(E-Mail Removed) oups.com...
Hi,
Has anyone experienced problems with DLINK DWL-AG700AP Access Point ?
I can browse the internet but not intranet PCs.
All my configurations seems to be ok (I posted on other forums before
this) but nobody can give me a solution!
I'll be glad to explain the problem in details (i.e. expalin exactly my
configuration) if someone will try to help me.

Thanks.

Hi Robert,

thank you for your reply,
No , I cannot ping any other IPs.
For more hints about my configuration, you can give a look to a
previous therad of mine.
http://www.wifi-forum.com/wf/showthread.php?t=67573
or (if broken)
http://www.wifi-forum.com post Thread: internet ok no lan

Thanks for your help.

> For more hints about my configuration, you can give a look to a
> previous therad of mine.
> http://www.wifi-forum.com/wf/showthread.php?t=67573

I've found some interesting things in your posts. i.e. you have "Indirizzo
IP configurazione automatica: 192.168.0.30", as I understand its your
alternate configuration for IP address (it's italian isn't it?). You also
have same address for your wireless card. It is possible, that your CISCO
router is having some problems with 2 MACs on same IP. CISCOs are too smart
and maybe you have to configure it.

The second quite strange thing - it's your default gateway settings for
wired and wireless cards. Why you have different IPs for gateway? Do you
have 2 different routers?

Hi Iuri,

Thanks for your post.
On laptop PC I have an Eth interface and a wi-fi one.
Eth interface IP is 192.168.0.30 (It's an alternative setting because
first one is DHCP enabled, due to the settings of my job lan).
Wi-fi IP is 192.168.0.31. The are not the same, one.

Second question: Default gateway: No, I have just one router (IP
192.168.0.100). In that post you correctly reported a different one
(192.168.0.50) for the wired network, but It's a my error (sorry !) : I
dumped the status of a temporary configuration I tried . Actually the
gateway is 192.168.0.100 for every interface (192.168.0.50 is the IP of
the Eth AP interface). Anyway I have no problem to browse the internet.
I only cannot browse lan's PCs.

Thanks

> the Eth AP interface). Anyway I have no problem to browse the internet.
> I only cannot browse lan's PCs.

And you can't ping local PCs, am i right? I think, it could be your CISCO
isue. Try to ask some help on CISCO support.

BTW, I had some PPPoE connection errors with DWL-2000+ and ISP's Linux
server because of D-link sending double packets.

Yes , you are right. I cannot ping local PCs.

I just tried to disconnect CISCO from the net, but I cannot ping PCs
anyway.

> I just tried to disconnect CISCO from the net, but I cannot ping PCs
> anyway.

You can't pnig PC by IP address or by name?

by IP address

Sorry for my precedent post, I were not attentive enough.

If you can't ping, in your case it's 90% physical issue. Did you try to
disable MAC filter?