Networking Forums

Networking Forums > Network Hardware > Home Networking > Dlink DSL -300T

Reply
Thread Tools Display Modes

Dlink DSL -300T

 
 
siwells1000000@ukonline.co.uk
Guest
Posts: n/a

 
      04-12-2006, 06:39 PM
hi
i have a d link dsl 300t ethernet adsl modem, and i cant seem to access
its setup pages.
the manual tells u to plug it in, and type its ip into iexplore, but i
just get the message "web page unavalible whilst offline"
also if i set my tcp/ip settings to "automaticly detect ip address" i
get the bubble kindly informing me that i have limited or no
conectivity. So i have set the ip, subnet mask and gatway to wat it
should be and this got rid of the error. i did enable the DHCP watsit
but the fact still remains that i cannot access the modem itself throug
internet explorer. I cant think of what to try next, ive tryed useing a
diffrent network card so its not that. the modem is brand new so its
not that either.

any help much appretiated

simon

 
Reply With Quote
 
 
 
 
Jeff Gaines
Guest
Posts: n/a

 
      04-12-2006, 09:49 PM
On 12/04/2006 (E-Mail Removed) wrote:

> the manual tells u to plug it in, and type its ip into iexplore, but i
> just get the message "web page unavalible whilst offline"


Try the File menu and un-tick 'Work Offline'?

--
Jeff Gaines - Damerham Hampshire UK
Using XanaNews 1.18.1.2
 
Reply With Quote
 
GM6TRS
Guest
Posts: n/a

 
      04-13-2006, 08:22 PM

<(E-Mail Removed)> wrote in message
news:(E-Mail Removed) oups.com...
> hi
> i have a d link dsl 300t ethernet adsl modem, and i cant seem to

access
> its setup pages.
> the manual tells u to plug it in, and type its ip into iexplore, but i
> just get the message "web page unavalible whilst offline"
> also if i set my tcp/ip settings to "automaticly detect ip address" i
> get the bubble kindly informing me that i have limited or no
> conectivity. So i have set the ip, subnet mask and gatway to wat it
> should be and this got rid of the error. i did enable the DHCP watsit
> but the fact still remains that i cannot access the modem itself

throug
> internet explorer. I cant think of what to try next, ive tryed useing

a
> diffrent network card so its not that. the modem is brand new so its
> not that either.
>
> any help much appretiated
>


Had similar problem with a Linksys modem. The eventual 'cure' was to put
the IP of the modem into the "trusted sites zone" of IE. My 'normal'
zone is fairly restrictive, and 'trusted' is pretty well anything goes,
so I don't know which parameter is the vital one.

Also found it's worth putting the modem IP into 'Favourites', and
clicking that to access the set up page, as otherwise IE is trying to
find your default home page while you're still typing the address.

Had no problem with my early version of free Zone Alarm, but YMMV if you
have a later, or different firewall.

- -
Martin


 
Reply With Quote
 
simon
Guest
Posts: n/a

 
      04-14-2006, 11:38 AM
thanks for the ideas, irl give it ago

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
dsl 300t siwells1000000@ukonline.co.uk Broadband 5 04-14-2006 11:47 AM
D link dsl-300T siwells1000000@ukonline.co.uk Broadband 0 04-12-2006 06:34 PM
Problems with Netgear WGR614 & Dlink dsl-300T Pascal Herczog Broadband 14 12-14-2004 09:25 AM
D-Link 300G+ or 300T ?? Peter Broadband 3 10-13-2004 07:35 PM
DLINK DSL 300T Problems Alex H Broadband 1 05-10-2004 10:36 AM



1 2 3 4 5 6 7 8 9 10 11