On Sun, 25 Jul 2004 03:11:53 GMT, "Steve" <(E-Mail Removed)> wrote:
>I upgraded my DI-524 to version 1.05 and now it seems my internet connection
>is terrible.
>Has anyone else had any problems with this firmware upgrade?
Damn, you're fast. 1.05 was just released yesterday.
1. Did you reset the router back to defaults after doing the flash
update?
2. If you have DSL with PPPoE, did you remember to change your MTU
from 1500 to 1492?
3. Is your unspecified client radio an 802.11b or 802.11g radio? If
802.11b, you might wanna disable the data rates over 11Mbits/sec and
see if that helps. 802.11g burns quite a bit of time dealing with
"compatible" 802.11b clients. (I'm not sure if 1.05 has this
feature).
4. Sometimes the WAN port NWAY negotiation protocol and speed screw
up. 1.05 adds a feature where you can set the WAN port to some
specific protocol and speed. I suggest 10baseT Half-Duplex.
--
Jeff Liebermann
(E-Mail Removed)
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 AE6KS 831-336-2558