dlink 614+ time sync

I have a dlink 614+ router. I seem to have no luck getting the time to set
correctly using the NTP server entry on the Tools-Time menu. Can somebody
tell me what IP address or value to put in this field? When can I expect it
to sync the time? when it's first powered up? some hours later?

thanx,
john

This IP address is from Windows Internet time. It works but I can't tell
*when* it syncs. Fuzzy design!

207.46.130.100

Dan

"Major Ninth" <(E-Mail Removed)> a écrit dans le message de
news:nHxAb.109553$(E-Mail Removed)...
> I have a dlink 614+ router. I seem to have no luck getting the time to set
> correctly using the NTP server entry on the Tools-Time menu. Can somebody
> tell me what IP address or value to put in this field? When can I expect
it
> to sync the time? when it's first powered up? some hours later?
>
> thanx,
> john
>
>

Here is a listing of public NTP servers http://www.ntp.org , I have the same
question regarding my DI-624 - its too early to tell if its syncing or not
(probably not).

"Major Ninth" <(E-Mail Removed)> wrote in message
news:nHxAb.109553$(E-Mail Removed)...
> I have a dlink 614+ router. I seem to have no luck getting the time to set
> correctly using the NTP server entry on the Tools-Time menu. Can somebody
> tell me what IP address or value to put in this field? When can I expect
it
> to sync the time? when it's first powered up? some hours later?
>
> thanx,
> john
>
>

It will sync every hour. Go to your log file and set on Debug Information
and you can see when it syncs.
"John" <jrl@_spam_me_not_bushinternet.com> wrote in message
news:3fd38105.0@entanet...
> Here is a listing of public NTP servers http://www.ntp.org , I have the
same
> question regarding my DI-624 - its too early to tell if its syncing or not
> (probably not).
>
> "Major Ninth" <(E-Mail Removed)> wrote in message
> news:nHxAb.109553$(E-Mail Removed)...
> > I have a dlink 614+ router. I seem to have no luck getting the time to
set
> > correctly using the NTP server entry on the Tools-Time menu. Can
somebody
> > tell me what IP address or value to put in this field? When can I expect
> it
> > to sync the time? when it's first powered up? some hours later?
> >
> > thanx,
> > john
> >
> >
>
>

On Sun, 07 Dec 2003 04:06:43 GMT, "Major Ninth"
<(E-Mail Removed)> wrote:

>I have a dlink 614+ router. I seem to have no luck getting the time to set
>correctly using the NTP server entry on the Tools-Time menu. Can somebody
>tell me what IP address or value to put in this field? When can I expect it
>to sync the time? when it's first powered up? some hours later?
>
>thanx,
>john

You'll need to upgrade to at least 2.20.

and

I recommend that you set up a NTP server in your private network and
set the 614+ to access the time from that server.

I found an open source NTP server program "Nettime 2.0" which has
been ported to windows.

I must stress..

DO NOT set up your NTP server to sync with the Public Time servers
more than ONCE in a 24 hour period. I.E. Follow the rules.. Don't
overload/abuse free public resources. (Dlink doesn't follow these
rules).

If you have a static IP address, and a 24x7 server, please share
your NTP server with fellow subscribers/router owners by opening up
TCP&UDP ports 123 and 37.