Disable wireless

When trying to disable my wireless connection ( while the wire is connected)

"It is not possible to disable the connection at this time. This connection
may be using one or more protocols that do not support Plug-and-Play, or it
may have been initiated by another user or system account"


I had to disabled the "Wireless Zero Configuration" service and reboot.

What is the cause and when can be done ?

Hi

If you want to disable it permanently, disable the Wireless card in the
device manager.

Otherwise you can change the metrics of the TCP/IP Stack giving priority to
the Wired connection and leave the Wireless as is,
http://www.ezlan.net/metrics.html

Jack (MVP-Networking).



"RE66" <(E-Mail Removed)> wrote in message
news:55044B5A-2899-45AC-B49F-(E-Mail Removed)...
> When trying to disable my wireless connection ( while the wire is
> connected)
>
> "It is not possible to disable the connection at this time. This
> connection
> may be using one or more protocols that do not support Plug-and-Play, or
> it
> may have been initiated by another user or system account"
>
>
> I had to disabled the "Wireless Zero Configuration" service and reboot.
>
> What is the cause and when can be done ?

Thanks,

The wire priority does not work.
But I had differnat question that was not answered.............

"Jack (MVP-Networking)." wrote:

> Hi
>
> If you want to disable it permanently, disable the Wireless card in the
> device manager.
>
> Otherwise you can change the metrics of the TCP/IP Stack giving priority to
> the Wired connection and leave the Wireless as is,
> http://www.ezlan.net/metrics.html
>
> Jack (MVP-Networking).
>
>
>
> "RE66" <(E-Mail Removed)> wrote in message
> news:55044B5A-2899-45AC-B49F-(E-Mail Removed)...
> > When trying to disable my wireless connection ( while the wire is
> > connected)
> >
> > "It is not possible to disable the connection at this time. This
> > connection
> > may be using one or more protocols that do not support Plug-and-Play, or
> > it
> > may have been initiated by another user or system account"
> >
> >
> > I had to disabled the "Wireless Zero Configuration" service and reboot.
> >
> > What is the cause and when can be done ?
>
>
>

Hi
I answered whatever I could understand.
May be if you would clarify further what you would like to do?
Jack (MVP-Networking).

"RE66" <(E-Mail Removed)> wrote in message
news0D07D5B-7912-4D99-9439-(E-Mail Removed)...
> Thanks,
>
> The wire priority does not work.
> But I had differnat question that was not answered.............
>
> "Jack (MVP-Networking)." wrote:
>
>> Hi
>>
>> If you want to disable it permanently, disable the Wireless card in the
>> device manager.
>>
>> Otherwise you can change the metrics of the TCP/IP Stack giving priority
>> to
>> the Wired connection and leave the Wireless as is,
>> http://www.ezlan.net/metrics.html
>>
>> Jack (MVP-Networking).
>>
>>
>>
>> "RE66" <(E-Mail Removed)> wrote in message
>> news:55044B5A-2899-45AC-B49F-(E-Mail Removed)...
>> > When trying to disable my wireless connection ( while the wire is
>> > connected)
>> >
>> > "It is not possible to disable the connection at this time. This
>> > connection
>> > may be using one or more protocols that do not support Plug-and-Play,
>> > or
>> > it
>> > may have been initiated by another user or system account"
>> >
>> >
>> > I had to disabled the "Wireless Zero Configuration" service and
>> > reboot.
>> >
>> > What is the cause and when can be done ?
>>
>>
>>