Hmmm newbie questions from me.
Are you using a matching D-Link adapter?
What OS are you using?
Have you tried another computer to see if it was not just one of htem.
How are the connection/signal levels to the router from your computer?
Is the antenna attached firmly?
Any brick walls, floors or electronic devices (microwaves or cordless
phones) close to either the router or the computer?
From the
http://www.netstumbler.com/downloads...ease_notes.pdf
.. When NetStumbler is in "auto reconfigure" mode (the default),
it will occasionally disconnect you from your network. This
enables it to perform its scans accurately, and is not a bug.\
So if I understand it correctly you might have Netstumbler working along
with your adapter software???
The adapter software is configured for YOUR router, but Netstumbler might
still be trying to scan for other access points.
later from the newbie,
dave also with a DI-524 and trying to learn <g>
"aldebaraan" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) ups.com...
> Okay, I've been working with NetStumbler, and I'm getting drops like
> crazy. I've continued to try every different configuration (WEP vs.
> none, MAC filtering vs. none, etc.), and they all seem to show spotty
> coverage.
>
> I am picking up two other networks (one strong and one spotty), and
> I've been on channel 6 while they were on 11 and 1 respectively. I
> switched to 10, though I figured 6 was fine, and the results were the
> same. Oh, and I already have a profile for my network set up, and I
> had the box to Automatically connect to non-preferred networks
> unchecked. After success with other products in the past, I'm really
> baffled as to what could be going wrong this time.
>
> I'm still thinking there's something weird with the DI-524...any ideas?
>