"RemyMaza" <(E-Mail Removed)> wrote in message
news:a2af6c8f-9d64-4b4c-beaa-(E-Mail Removed)...
I did read that this is necessary for DHCP to work and it must be
working since I can activate the old DHCP and grab an IP address.
Would the router have a hard coded IP address to only allow this type
of traffic from a certain IP?
---------------------------------------------------------------
Matt,
Think through what you had to start with. You had a DHCP Server handling two
subnets. That can only happen if the LAN Router between the subnets is
configured to forward DHCP Queries to the DHCP Server. Without that the
queries can never cross the router, and hence never get to the DHCP server.
So you replaced the DHCP Server,...meaning that it probably has a new
IP#,...meaning that the LAN Router is probably still forwarding the queries
to the old IP#,...hence the old DHCP works when you enable it but the new
one doesn't.
So,...fix the LAN Router's configuration to foreward the DHCP Queries to the
new IP# instead of the old one.
--
Phillip Windell
www.wandtv.com
The views expressed, are my own and not those of my employer, or Microsoft,
or anyone else associated with me, including my cats.
-----------------------------------------------------