Networking Forums

Networking Forums > Computer Networking > Windows Networking > DHCP Scope Lost Gateway Information

Reply
Thread Tools Display Modes

DHCP Scope Lost Gateway Information

 
 
Steve Choo
Guest
Posts: n/a

 
      06-09-2005, 01:03 AM
Problem:

Suddenly, we just lost the gateway setting from 1 of the 60 scopes we have
on our DHCP server. There are 2 servers that are providing DHCP (half/half)
but only 1 of the servers lost its gateway information for 1 scope.
Has anyone had a problem like this? (This isn't a "slip of the finger" as
nobody has logged into the server in days)

I'm hoping I can get some good leads from the good folks out here. Thanks!
 
Reply With Quote
 
 
 
 
NunoCosta
Guest
Posts: n/a

 
      06-11-2005, 07:14 PM
I never see one problem like yours. But have you sure you are doing all good?
I did not understant the part of two dhcp half/half?
Same scopes?

"Steve Choo" wrote:

> Problem:
>
> Suddenly, we just lost the gateway setting from 1 of the 60 scopes we have
> on our DHCP server. There are 2 servers that are providing DHCP (half/half)
> but only 1 of the servers lost its gateway information for 1 scope.
> Has anyone had a problem like this? (This isn't a "slip of the finger" as
> nobody has logged into the server in days)
>
> I'm hoping I can get some good leads from the good folks out here. Thanks!

 
Reply With Quote
 
Tanu Mutreja [MSFT]
Guest
Posts: n/a

 
      06-22-2005, 10:26 PM
Steve,

Could you capture Audit logs or any further information in this regard? If
yes, could you forward that? It's a bit tough to understand the problem with
this much information.

Thanks,
Tanu Mutreja [MSFT]
--
Please do not send e-mail directly to this alias. This alias is for
newsgroup purposes only.

"NunoCosta" <(E-Mail Removed)> wrote in message
news:A0216FEF-A45D-4ADF-B34F-(E-Mail Removed)...
>I never see one problem like yours. But have you sure you are doing all
>good?
> I did not understant the part of two dhcp half/half?
> Same scopes?
>
> "Steve Choo" wrote:
>
>> Problem:
>>
>> Suddenly, we just lost the gateway setting from 1 of the 60 scopes we
>> have
>> on our DHCP server. There are 2 servers that are providing DHCP
>> (half/half)
>> but only 1 of the servers lost its gateway information for 1 scope.
>> Has anyone had a problem like this? (This isn't a "slip of the finger"
>> as
>> nobody has logged into the server in days)
>>
>> I'm hoping I can get some good leads from the good folks out here.
>> Thanks!



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How DHCP decide which scope to give thourgh dhcp relay agent? cs Windows Networking 3 01-04-2007 03:48 AM
Configuring a 2nd DHCP Scope on one DHCP server Ron Windows Networking 1 10-17-2006 06:36 PM
Creating split-scope DHCP from a running DHCP server... Claude Lachapelle Windows Networking 3 09-11-2006 03:18 PM
2nd DHCP Scope? Stranger Windows Networking 34 01-04-2006 03:53 AM
DHCP Looses Scope Configuration Information Windows Networking 0 06-15-2004 05:52 PM



1 2 3 4 5 6 7 8 9 10 11