DHCP Jet Database Errors

I was getting 3 event IDs in my system log regarding DHCP (listed below). I
had migrated my DHCP database from an existing server that was just
decommissioned to a new server I just put into production, and the DHCP
server appeared to be functioning normally; the DHCP service was authorized,
running, and making assignments, and all looked fine in the DHCP console.
However, due to the event log errors, I decided to set up a clean DHCP
database from scratch. I uninstalled DHCP and deleted the DHCP folder under
\%systemroot%\system32\, then reinstalled DHCP and started over with what I
thought was a new, clean database. However, I'm still getting the same 3
errors in my event logs. The server is a Domain Controller.

Any ideas? I have no idea what's going on.

Thanks in advance,

Bryan
____________________
Event Type: Error
Event Source: DhcpServer
Event Category: None
Event ID: 1014
Date: 11/16/2006
Time: 12:33:10 AM
User: N/A
Computer: MyDC
Description:
The following problem occurred with the Jet database -1032: Jet database
read or write operations failed. If the computer or database has just been
upgraded, then this message can be safely ignored. If this message appears
frequently, either there is not enough disk space to complete the operation
or the database or backup database may be corrupt. To correct this
problem, either free additional space on your hard disk or restore the
database. After you restore the database, ensure that conflict detection is
enabled in DHCP server properties. For information about restoring the
database, see Help and Support Center. Additional Debug Information:
JetBackup.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: f8 fb ff ff øûÿÿ
____________________
Event Type: Error
Event Source: DhcpServer
Event Category: None
Event ID: 1016
Date: 11/16/2006
Time: 12:33:10 AM
User: N/A
Computer: MyDC
Description:
The DHCP service encountered the following error when backing up the
database:
An error occurred while accessing the DHCP database. Look at the
DHCP server event log for more information on this error.


For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 2d 4e 00 00 -N..
____________________
Event Type: Error
Event Source: DhcpServer
Event Category: None
Event ID: 1010
Date: 11/16/2006
Time: 12:33:10 AM
User: N/A
Computer: MyDC
Description:
The DHCP service encountered the following error while cleaning up the
database:
An error occurred while accessing the DHCP database. Look at the
DHCP server event log for more information on this error.


For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 2d 4e 00 00 -N..
_____________________