DHCP IPv& Win2008

hello;

i0ve installed a primary DC 2008 with dhcp in statefull mode.
the ipv6 of server is fec0:0:fffe::1

i've more client with ipv6 in dhcp mode, but the address cannot be acquired...

any help?

Hello II,

Is the DHCP server authorized in AD?

Do you have a full IPv6 network or also some IPv4 machines?

Have you "managed address configuration" on your client enabled? You can
do it with this command:

netsh interface ipv6 set interface "interface name " managedaddress=enabled
advertise=enabled


Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> hello;
>
> i0ve installed a primary DC 2008 with dhcp in statefull mode. the ipv6
> of server is fec0:0:fffe::1
>
> i've more client with ipv6 in dhcp mode, but the address cannot be
> acquired...
>
> any help?
>

Thanks a lot!

the network is only IPv6 mode.
I've configured DHCP anche authorized it in AD.
I've enabled managedaddress but the dhcp cannot be leased.

i've one question...with statefull dhcp server is neccessary a router than
manage O and M flag for release DHCPv6 address?
i try to configure dhcpv6 and client with ipv6 with virtual machine VMware.

"Meinolf Weber" wrote:

> Hello II,
>
> Is the DHCP server authorized in AD?
>
> Do you have a full IPv6 network or also some IPv4 machines?
>
> Have you "managed address configuration" on your client enabled? You can
> do it with this command:
>
> netsh interface ipv6 set interface "interface name " managedaddress=enabled
> advertise=enabled
>
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>
> > hello;
> >
> > i0ve installed a primary DC 2008 with dhcp in statefull mode. the ipv6
> > of server is fec0:0:fffe::1
> >
> > i've more client with ipv6 in dhcp mode, but the address cannot be
> > acquired...
> >
> > any help?
> >
>
>
>

Hello II,

See here about the flags:
http://technet.microsoft.com/en-us/m.../cc162485.aspx

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> Thanks a lot!
>
> the network is only IPv6 mode.
> I've configured DHCP anche authorized it in AD.
> I've enabled managedaddress but the dhcp cannot be leased.
> i've one question...with statefull dhcp server is neccessary a router
> than
> manage O and M flag for release DHCPv6 address?
> i try to configure dhcpv6 and client with ipv6 with virtual machine
> VMware.
> "Meinolf Weber" wrote:
>
>> Hello II,
>>
>> Is the DHCP server authorized in AD?
>>
>> Do you have a full IPv6 network or also some IPv4 machines?
>>
>> Have you "managed address configuration" on your client enabled? You
>> can do it with this command:
>>
>> netsh interface ipv6 set interface "interface name "
>> managedaddress=enabled advertise=enabled
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers
>> no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> hello;
>>>
>>> i0ve installed a primary DC 2008 with dhcp in statefull mode. the
>>> ipv6 of server is fec0:0:fffe::1
>>>
>>> i've more client with ipv6 in dhcp mode, but the address cannot be
>>> acquired...
>>>
>>> any help?
>>>