DG834PN bridge to WG602v3

Hello,
For an year I used a Mimo router wireless Netgear DG834PN to serve 4
apartments,
now to serve another PC that its out of range I buyed a Netgear
WG602v3 to use like bridge.
In effects it has potentiality of bridge, in particular concurs the 4
following modes :

1) Wireless Point-to-Point Bridging
2) Wireless Fine Bridging
3) Repeater with Wireless Client Association
4) Client Mode

I don't know which mode to use, I need that DG834PN dynamically assign
an IP to WG602v3 and the devices connected to him,

After two days of tests I can say that nothing works, and I read
somewhere that maybe these devices could not be used to implement a
bridge capability.

Can you help me to choise the right configuration ?
Thanks

Antonio

www.etantonio.it

On 11 Feb 2007 12:32:48 -0800, "Etantonio" <(E-Mail Removed)> wrote
in <(E-Mail Removed) .com>:

>For an year I used a Mimo router wireless Netgear DG834PN to serve 4
>apartments,
>now to serve another PC that its out of range I buyed a Netgear
>WG602v3 to use like bridge.
>In effects it has potentiality of bridge, in particular concurs the 4
>following modes :
>
>1) Wireless Point-to-Point Bridging

Nope -- that's a host mode.

>2) Wireless Fine Bridging

Have no idea what that is.

>3) Repeater with Wireless Client Association

Could work, but cuts network speed in half.

>4) Client Mode

Works if you connect the out of range PC by cable to the WG602v3.

>I don't know which mode to use, I need that DG834PN dynamically assign
>an IP to WG602v3 and the devices connected to him,
>
>After two days of tests I can say that nothing works, and I read
>somewhere that maybe these devices could not be used to implement a
>bridge capability.
>
>Can you help me to choise the right configuration ?

See above. See wikis below.

--
Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>

Netgear says that I can't arrange such system.
I've to use two WG602 or otherwise to use a stronger Access point.
This is not good for me

antonio
www.etantonio.it/en