Networking Forums

Networking Forums > Computer Networking > Linux Networking > ddclient and Dyn DNS

Reply
Thread Tools Display Modes

ddclient and Dyn DNS

 
 
Schewdent
Guest
Posts: n/a

 
      08-06-2004, 11:00 PM
Hi,
I'm trying to set up the above software to get myself a name on the
Internet (haha! ), and it doenst work. When booting up I see a
"starting ddclient.... <nothing>" , ie. no OK or failed. I've done
everything the README said, and I occassionally get "status reports" in my
mailbox saying "caught SIGTERM.... exiting", and this is in fact mentioned
on the projects freshmeat page. Whats going wrong, and how do I fix it?


Thanks


Schewdent.

 
Reply With Quote
 
 
 
 
John
Guest
Posts: n/a

 
      08-07-2004, 01:30 PM
On Fri, 06 Aug 2004 23:00:43 +0000, Schewdent wrote:
> I'm trying to set up the above software to get myself a name on the
> Internet (haha! ), and it doenst work. When booting up I see a
> "starting ddclient.... <nothing>" , ie. no OK or failed. I've done
> everything the README said, and I occassionally get "status reports" in
> my mailbox saying "caught SIGTERM.... exiting", and this is in fact
> mentioned on the projects freshmeat page. Whats going wrong, and how do
> I fix it?


ddclient works properly for me. The only stunt I had to pull was to
search for the second ip address (the WAN one) in the status web page of
my Linksys. This is a known problem with this type of router, and the fix
is documented in the readme. It just works.

You will get the "caught SIGTERM" message every time you reboot. Its not
a problem -- its a desirable feature.

ddclient is SUPPOSED to be silent. Every couple of weeks, or whenever it
notices that your ip address has changed, it will send you a note about
this update to dyndns.

Clear now?
 
Reply With Quote
 
Schewdent
Guest
Posts: n/a

 
      08-07-2004, 04:19 PM
On Sat, 07 Aug 2004 13:30:20 +0000, John wrote:


> Clear now?



Could you tell me how you set it up?

 
Reply With Quote
 
Swedey
Guest
Posts: n/a

 
      08-08-2004, 06:19 PM
Schewdent wrote:

> On Sat, 07 Aug 2004 13:30:20 +0000, John wrote:
>
>
>> Clear now?

>
>
> Could you tell me how you set it up?


There's a file /etc/ddclient.conf.

For the dyndns part, uncomment it (remove the #s) and also add the lines for
your username and password. If you don't have your own custom domain, then
custom dns should say "no".

I have mine check online rather than read my router's page (the "use web"
feature). Try (uncomment) that if you're having problems getting the right
IP address from your router until you can fix it.


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
ddclient to update dynamic DNS entries at a dynamic DNS service Larry Cohen Linux Networking 1 09-12-2004 01:47 AM
ICMP from ADSL router / ddclient Ueli =?ISO-8859-1?Q?Schl=E4pfer?= Linux Networking 0 10-12-2003 08:35 PM



1 2 3 4 5 6 7 8 9 10 11