dc2008 on sub network

e hello

i mount a new DC2008 on my domain

i prepare it on the main site last week

today i put it on a sub network, i modify the tcp parameters as for my other
DC on the same sub network

i disconnect the firewall and IP V6

i can ping my sub domain, but impossible for the main domain

on this sub network i have one DC200 SP4 and one DC2003R2 without pb



have i miss something

--
nt

i found something

if i put dhcp on the computer and ipconfig /all
it give me 2 gateway, and the default gateway is is one adress ...
and after i can ping my server on my other site

if i want to disable dhcp how to configure the gateway

thanks
--
nt


"nicolas29" wrote:

> e hello
>
> i mount a new DC2008 on my domain
>
> i prepare it on the main site last week
>
> today i put it on a sub network, i modify the tcp parameters as for my other
> DC on the same sub network
>
> i disconnect the firewall and IP V6
>
> i can ping my sub domain, but impossible for the main domain
>
> on this sub network i have one DC200 SP4 and one DC2003R2 without pb
>
>
>
> have i miss something
>
> --
> nt

we need more information to help. What's the subnet IP range and gateway. Or
post the result of ipconfig /all with DHCP settings.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"nicolas29" <(E-Mail Removed)> wrote in message
news:67BADEA1-E834-43B2-8ABA-(E-Mail Removed)...
>i found something
>
> if i put dhcp on the computer and ipconfig /all
> it give me 2 gateway, and the default gateway is is one adress ...
> and after i can ping my server on my other site
>
> if i want to disable dhcp how to configure the gateway
>
> thanks
> --
> nt
>
>
> "nicolas29" wrote:
>
>> e hello
>>
>> i mount a new DC2008 on my domain
>>
>> i prepare it on the main site last week
>>
>> today i put it on a sub network, i modify the tcp parameters as for my
>> other
>> DC on the same sub network
>>
>> i disconnect the firewall and IP V6
>>
>> i can ping my sub domain, but impossible for the main domain
>>
>> on this sub network i have one DC200 SP4 and one DC2003R2 without pb
>>
>>
>>
>> have i miss something
>>
>> --
>> nt

Hello nicolas29,

Please post an ipconfig /all from the 2008 DC and also from one existing
DC in the remote office. What do you mean with ping the subdomain/maindomain,
the subdomain/maindomain name itself or an existing server there? Please
post also the domain names you use.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> e hello
>
> i mount a new DC2008 on my domain
>
> i prepare it on the main site last week
>
> today i put it on a sub network, i modify the tcp parameters as for my
> other DC on the same sub network
>
> i disconnect the firewall and IP V6
>
> i can ping my sub domain, but impossible for the main domain
>
> on this sub network i have one DC200 SP4 and one DC2003R2 without pb
>
> have i miss something
>

Hello Nt,

Thank you for posting here. Also thanks for all your input.

According to your description, I understand that:

You promote a new Windows Server 2008 domain controller into a domain in
the main site. Then you attempt to move the DC to another site.

If I have misunderstood the problem, please don't hesitate to let me know.

Suggestions:
===================
More information such as IPCONFIG /all on the Windows Server 2003 R2 DC and
problematic Windows Server 2008 DC will help to understand your
environment.

From the description, it seems to be a network connectivity issue. Please
check the following aspects:

1. For domain controller, please assign a static IP address with the
gateway and DNS settings instead of using the dynamic IP lease from DHCP
service.
2. The gateway address should be the router that can route the traffic to
the main site (such as a VPN connection to the main site).

More information about the multiple site deployment, you may refer to:

Branch office over the Internet
http://technet.microsoft.com/en-us/l.../cc736396.aspx

Windows Server 2003 Active Directory Branch Office Guide
http://www.microsoft.com/downloads/d...4f6-a8a8-40bb-
9fa7-3a95c9540112&DisplayLang=en

Branch Infrastructure Implementation Solution for Windows Server 2008
http://www.microsoft.com/downloads/d...405-49AF-4867-
BF1D-E0232B5C59E3&displaylang=en

Information needed:
===================

If the issue persists, please help to collect the Directory Service MPS
report on the Windows Server 2003 R2 DC and problematic Windows Server 2008
DC. Then send to me at (E-Mail Removed).

Microsoft Product Support's Reporting Tools (MPSRPT_DirSvc.EXE)
http://www.microsoft.com/downloads/d...C7C-7CA5-408F-
88B7-F9C79B7306C0&displaylang=en

Note:

a. Please include the following three lines for this issue in the email
body:

dc2008 on sub network
#42658283
Miles Li - MSFT

b. We will continue to discuss the issue here in the forum and will NOT
reply via emails.

c. Pease post a quick note in the current thread to inform me after sending
the email.

Thanks.



Best regards,
Miles Li

Microsoft Online Partner Support
Microsoft Global Technical Support Center

Get Secure! - www.microsoft.com/security
================================================== ===
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
================================================== ===
This posting is provided "AS IS" with no warranties, and confers no rights.

sorry for the time

i put back in the main office the server

test the ip adress and the route it was ok

so i remake the parameters for my branch office, clear the cache

and deplace it and now with magie it s ok

thanks for your help

nicolas
"Robert L. (MS-MVP)" <(E-Mail Removed)> a écrit dans le message de
news:%(E-Mail Removed)...
> we need more information to help. What's the subnet IP range and gateway.
> Or post the result of ipconfig /all with DHCP settings.
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
> "nicolas29" <(E-Mail Removed)> wrote in message
> news:67BADEA1-E834-43B2-8ABA-(E-Mail Removed)...
>>i found something
>>
>> if i put dhcp on the computer and ipconfig /all
>> it give me 2 gateway, and the default gateway is is one adress ...
>> and after i can ping my server on my other site
>>
>> if i want to disable dhcp how to configure the gateway
>>
>> thanks
>> --
>> nt
>>
>>
>> "nicolas29" wrote:
>>
>>> e hello
>>>
>>> i mount a new DC2008 on my domain
>>>
>>> i prepare it on the main site last week
>>>
>>> today i put it on a sub network, i modify the tcp parameters as for my
>>> other
>>> DC on the same sub network
>>>
>>> i disconnect the firewall and IP V6
>>>
>>> i can ping my sub domain, but impossible for the main domain
>>>
>>> on this sub network i have one DC200 SP4 and one DC2003R2 without pb
>>>
>>>
>>>
>>> have i miss something
>>>
>>> --
>>> nt
>