DC Authenication

Is there a way to configure my workstation to authenicate with the DC at
their location. What's happening is that some workstation will have to
travel across the WAN to authenicate with a DC which cases high network
traffic exspecially in the mornings.

Try to set up your sites and subnets on DC.

Ray

"fanman36" <(E-Mail Removed)> wrote in message
news:9433AFDF-4385-4EEF-BB3D-(E-Mail Removed)...
> Is there a way to configure my workstation to authenicate with the DC at
> their location. What's happening is that some workstation will have to
> travel across the WAN to authenicate with a DC which cases high network
> traffic exspecially in the mornings.

Is there KB from MS that can guide me thru the steps. I went into sites and
subnet and when i add the first subnet it only shows Default first in the
option window.

"Ray" wrote:

> Try to set up your sites and subnets on DC.
>
> Ray
>
> "fanman36" <(E-Mail Removed)> wrote in message
> news:9433AFDF-4385-4EEF-BB3D-(E-Mail Removed)...
> > Is there a way to configure my workstation to authenicate with the DC at
> > their location. What's happening is that some workstation will have to
> > travel across the WAN to authenicate with a DC which cases high network
> > traffic exspecially in the mornings.
>
>
>

Sorry, I don't know any KB for it. From my personal experience, it's very
easy.

1. Set up sites first, you could rename the default site;
2. Set up subnets within sites;
3. Move servers into their appropriate sites;
4. done.

Ray

"fanman36" <(E-Mail Removed)> wrote in message
news:27195118-7554-4648-8D2D-(E-Mail Removed)...
> Is there KB from MS that can guide me thru the steps. I went into sites
> and
> subnet and when i add the first subnet it only shows Default first in the
> option window.
>
> "Ray" wrote:
>
>> Try to set up your sites and subnets on DC.
>>
>> Ray
>>
>> "fanman36" <(E-Mail Removed)> wrote in message
>> news:9433AFDF-4385-4EEF-BB3D-(E-Mail Removed)...
>> > Is there a way to configure my workstation to authenicate with the DC
>> > at
>> > their location. What's happening is that some workstation will have to
>> > travel across the WAN to authenicate with a DC which cases high network
>> > traffic exspecially in the mornings.
>>
>>
>>

Thanks for help. It was easy and hopefully this will reduce my WAN traffic in
the mornings.

"Ray" wrote:

> Sorry, I don't know any KB for it. From my personal experience, it's very
> easy.
>
> 1. Set up sites first, you could rename the default site;
> 2. Set up subnets within sites;
> 3. Move servers into their appropriate sites;
> 4. done.
>
> Ray
>
> "fanman36" <(E-Mail Removed)> wrote in message
> news:27195118-7554-4648-8D2D-(E-Mail Removed)...
> > Is there KB from MS that can guide me thru the steps. I went into sites
> > and
> > subnet and when i add the first subnet it only shows Default first in the
> > option window.
> >
> > "Ray" wrote:
> >
> >> Try to set up your sites and subnets on DC.
> >>
> >> Ray
> >>
> >> "fanman36" <(E-Mail Removed)> wrote in message
> >> news:9433AFDF-4385-4EEF-BB3D-(E-Mail Removed)...
> >> > Is there a way to configure my workstation to authenicate with the DC
> >> > at
> >> > their location. What's happening is that some workstation will have to
> >> > travel across the WAN to authenicate with a DC which cases high network
> >> > traffic exspecially in the mornings.
> >>
> >>
> >>
>
>
>