D_Link DWL 650 Adapter

Has anyone been able to install a D-Link DWL-650D to work
properly? I cannot -- The Conditions are:
Signal Strength: 86% Link Quality: 98%.
D-Link adapter not shown in IP Configuration (winipcfg)
Device manager shows the card as working properly.
SSID: ACTIONTEC - looks good
Card appears to be working but it seems to have a corrupt
TCP/IP stack in Windows98.

In article <1737201c448d1$c5d01650$(E-Mail Removed)>, "Jack"
<(E-Mail Removed)> wrote:
>Has anyone been able to install a D-Link DWL-650D to work
>properly? I cannot -- The Conditions are:
>Signal Strength: 86% Link Quality: 98%.
>D-Link adapter not shown in IP Configuration (winipcfg)
>Device manager shows the card as working properly.
>SSID: ACTIONTEC - looks good
>Card appears to be working but it seems to have a corrupt
>TCP/IP stack in Windows98.

Does the Windows98 computer have several other network adapters? If
so, it might have reached the limit on TCP/IP bindings. This
Microsoft Knowledge Base article describes the limit and shows how to
increase it:

Unable to Bind Protocols to More Than 5 Network Adapters
http://support.microsoft.com/?id=217744
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm

Steve, Thanks for the suggestion. I am using 4 network
adapters, so this does appear to be the problem.

>-----Original Message-----
>In article <1737201c448d1$c5d01650
$(E-Mail Removed)>, "Jack"
><(E-Mail Removed)> wrote:
>>Has anyone been able to install a D-Link DWL-650D to
work
>>properly? I cannot -- The Conditions are:
>>Signal Strength: 86% Link Quality: 98%.
>>D-Link adapter not shown in IP Configuration (winipcfg)
>>Device manager shows the card as working properly.
>>SSID: ACTIONTEC - looks good
>>Card appears to be working but it seems to have a
corrupt
>>TCP/IP stack in Windows98.
>
>Does the Windows98 computer have several other network
adapters? If
>so, it might have reached the limit on TCP/IP bindings.
This
>Microsoft Knowledge Base article describes the limit and
shows how to
>increase it:
>
>Unable to Bind Protocols to More Than 5 Network Adapters
>http://support.microsoft.com/?id=217744
>--
>Best Wishes,
>Steve Winograd, MS-MVP (Windows Networking)
>
>Please post any reply as a follow-up message in the news
group
>for everyone to see. I'm sorry, but I don't answer
questions
>addressed directly to me in E-mail or news groups.
>
>Microsoft Most Valuable Professional - Windows Networking
>http://mvp.support.microsoft.com
>
>Steve Winograd's Networking FAQ
>http://www.bcmaven.com/networking/faq.htm
>.
>

Problem Solved! The steps for installation included the
following
1. Do not have the DWL card installed.
2. Open System Properties/Device Manager and disable
all network adapters.
For my ThinkPad T22 laptop the adapters are:
a. Dial-Up Adapter
b. IBM ThinkPad Fast Infrared Port
c. Intel® PRO/SP Mobile Combo Adapter
3. Download and install dwl650m_driver_101.zip from D-
Link Website.
http://support.dlink.com/products/revision.asp.
4. Install drivers from D-Link Air Adapter Disk per
instructions.
5. Install DWL 650 Card per instructions.
6. Verify the card is correctly installed
using "winipcfg"
Click on Start - Run - Then type "winipcfg"
D-Link Air Wireless LAN Adapter should appear in the IP
Configuration.
The card is now installed correctly installed. Continue
the LAN installation.

>-----Original Message-----
>Steve, Thanks for the suggestion. I am using 4 network
>adapters, so this does appear to be the problem.
>
>>-----Original Message-----
>>In article <1737201c448d1$c5d01650
>$(E-Mail Removed)>, "Jack"
>><(E-Mail Removed)> wrote:
>>>Has anyone been able to install a D-Link DWL-650D to
>work
>>>properly? I cannot -- The Conditions are:
>>>Signal Strength: 86% Link Quality: 98%.
>>>D-Link adapter not shown in IP Configuration (winipcfg)
>>>Device manager shows the card as working properly.
>>>SSID: ACTIONTEC - looks good
>>>Card appears to be working but it seems to have a
>corrupt
>>>TCP/IP stack in Windows98.
>>
>>Does the Windows98 computer have several other network
>adapters? If
>>so, it might have reached the limit on TCP/IP bindings.
>This
>>Microsoft Knowledge Base article describes the limit and
>shows how to
>>increase it:
>>
>>Unable to Bind Protocols to More Than 5 Network Adapters
>>http://support.microsoft.com/?id=217744
>>--
>>Best Wishes,
>>Steve Winograd, MS-MVP (Windows Networking)
>>
>>Please post any reply as a follow-up message in the news
>group
>>for everyone to see. I'm sorry, but I don't answer
>questions
>>addressed directly to me in E-mail or news groups.
>>
>>Microsoft Most Valuable Professional - Windows Networking
>>http://mvp.support.microsoft.com
>>
>>Steve Winograd's Networking FAQ
>>http://www.bcmaven.com/networking/faq.htm
>>.
>>
>.
>