D-Link DWL-G122

I have a D-Link DWL-G122 which I have successfully used with a Netgear
WGR614v5 router. It works on one of my PCs (WinXP Pro) but when I move
it to another it just can't connect.

The PC that fails is also a WinXP Pro with an almost identical software
setup. Except maybe for dotNET 2.0 instead of 1.1

At the hardware level, the motherboards are different. The one that
works is MSI and the one that fails is Gigabyte 8S661FXMP-RZ.

When I say it won't connect, I should say that sometimes it sees the
network, and gets the SSID, but it can't get an IP. Most times it can't
even see the network.

I have tried all the usual,
* putting it within 2 or 3 metres line of sight to the router
* disabling encryption at both ends
* using both Windows then the D-Link to connect
* Uninstalling then re-installing the drivers
* made sure I have the latest drivers

Has anyone else had a problem with the DWL-G122 (rev B1) and a
8S661FXMP-RZ based PC?

thanks for any help
Merc

Almost certainly nothing to do with your hardware, just network set up.
Set the adaptors gateway to the routers IP (probably 192.168.1.1) that
should help it to get an IP from the DHCP.
If that doesn't help, just set the wifi adaptor's with a static IP manually.
Regards,
Martin