Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > D-Link DI-624 Doesn't work.

Reply
Thread Tools Display Modes

D-Link DI-624 Doesn't work.

 
 
big_d_316@yahoo.com
Guest
Posts: n/a

 
      11-27-2008, 08:03 PM
Hey I could use some help here.
I have a D-Link DI-624 Router, rev C, So far, the power, Status,
WLAN LEDs doesn't light up. However WAN, Local Network 1-4 light u,
and stay on. They are lit if there is something plugged in, or
nothing. I can't get any access to the setup page, reset doesn't do
anything. Laptop can't detect it, and when desktop is plugged into it,
I have no network connection. I can't remember what firmware I have on
it anymore, because I had it in storage for several months now, and
now I brought it out, after I got a laptop. It did work for a bit,
then after I plugged the PC in, it went to hell from there. Any help
please?

 
Reply With Quote
 
 
 
 
jnkmail009@yahoo.com
Guest
Posts: n/a

 
      11-28-2008, 03:45 PM
On Nov 27, 4:03*pm, big_d_...@yahoo.com wrote:
> Hey I could use some help here.
> * I have a D-Link DI-624 Router, rev C, So far, the power, Status,
> WLAN LEDs doesn't light up. However WAN, Local Network 1-4 light u,
> and stay on. They are lit if there is something plugged in, or
> nothing. I can't get any access to the setup page, reset doesn't do
> anything. Laptop can't detect it, and when desktop is plugged into it,
> I have no network connection. I can't remember what firmware I have on
> it anymore, because I had it in storage for several months now, and
> now I brought it out, after I got a laptop. It did work for a bit,
> then after I plugged the PC in, it went to hell from there. Any help
> please?


I had a DLink AP do exactly that after a power flick during a storm.
The WLAN LEDs (802.11a/bg) (and power, IIRC) stopped illuminating, but
everything else was still lit. Reset didn't work on it either.
I thought it was toast, but was able to fix it. The firmware simply
became corrupted during the power flicker. When I hooked it up to a
computer directly, it gave me a page saying that firmware was
corrupted and an option to update the firmware.

Are you setting up a static IP on your laptop before you connect it?
Set up something like IP 192.168.0.100 , Subnet mask 255.255.255.0 ,
and then try connecting to it at 192.168.0.1
If it is just corrupted firmware, you should get a page saying that
the firmware is corrupted and also a means to upload new firmware from
your laptop.

Try connecting the laptop to both the WAN and one (all, if need be)
LAN ports. I forget which I had to use. (I think it was actually one
of the LAN ports that I did have success with.)

If that doesn't work, then it is probably toast...

 
Reply With Quote
 
big_d_316@yahoo.com
Guest
Posts: n/a

 
      11-29-2008, 09:17 PM
how do I grand reset? Is that when I plug it in with the reset
pressed?
 
Reply With Quote
 
big_d_316@yahoo.com
Guest
Posts: n/a

 
      11-29-2008, 09:19 PM
how do I grand reset? Is that when I plug it in with the reset
pressed?
 
Reply With Quote
 
Pennywise@DerryMaine.Gov
Guest
Posts: n/a

 
      11-30-2008, 03:42 AM
(E-Mail Removed) wrote:

>how do I grand reset? Is that when I plug it in with the reset
>pressed?


Some are different, but figure you need to unplug or disconnect the
power, then press and hold down the reset button for 10 to ? seconds.
--

Find and mayhaps repair a stuck pixel
http://tinyurl.com/6nro6h
 
Reply With Quote
 
§ñühwØ£f
Guest
Posts: n/a

 
      11-30-2008, 03:41 PM
On Sat, 29 Nov 2008 14:17:20 -0800, big_d_316 aided th' terraists with the
following claims :

> how do I grand reset? Is that when I plug it in with the reset
> pressed?


Well first off its gonna *cost* you...
Like a thousand dollars



--
"Those who can make you believe absurdities,
can make you commit atrocities" - Voltaire
http://www.alternet.org



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
D-link DSL G624M firewall simply doesn't work HexSoap Broadband 0 04-04-2006 09:48 PM
D-Link DWL-G122 USB adapter doesn't work after reinstalling Win XP, help please? Sunnyrain Wireless Internet 5 11-02-2005 01:13 AM
D-LINK DWL-AG650 doesn't work with WinXP - Zero Configuration Service (WZCSVC) / D-Link AirXpert nearly works Johannes Rosenstock Wireless Networks 0 08-27-2004 11:49 PM
D-LINK DWL-AG650 doesn't work with WinXP - Zero Configuration Service (WZCSVC) / D-Link AirXpert nearly works Johannes Rosenstock Wireless Internet 0 08-27-2004 11:48 PM
NIC doesn't work SGNOME Windows Networking 3 01-14-2004 01:41 PM



1 2 3 4 5 6 7 8 9 10 11