On 5 Aug 2004 17:39:35 -0700,
(E-Mail Removed) (manbo) wrote:
>The two access points are a DWL-900AP+ and a DWL-2000AP
>I currently have the DWL-2000AP as an access point and the DWL-900AP+
>as a wireless client, allowing my computers to connect via my
>DWL-900AP+ to the DWL-2000AP and then through my gateway.
>
>The problem:
>I have noticed on the logs of both devices that they seem to
>disconnect and reconnect to each other.
(...)
DWL-900AP+
http://support.dlink.com/techtool/DW...v_perform.html
1. Disable the 4X mode.
2. Reduce the "TX Rates" from 1-22Mbits/sec to 1-11Mbits/sec.
DWL-2000AP
http://support.dlink.com/TechTool/DW...v_perform.html
1. Do NOT enable the 802.11g only mode.
2. Try changing the TX Rate from "Auto" to 5.5 or 11Mbits/sec. Do
NOT select any of the 802.11g speeds. I've found that I sometimes get
disconnects when the AP changes speed due to interference.
--
Jeff Liebermann
(E-Mail Removed)
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 AE6KS 831-336-2558