In article <(E-Mail Removed)>, "Patrick"
<(E-Mail Removed)> wrote:
>I have linked up 2 Windows XP machines together using a cross over cable
>(and the connection is working in that I could remote-desktop from one
>machine on to another). However, I am interested to know how I could share
>the following amonst the 2 computers
>1) Internet Connnection (with a USB Broadband modem on 1 of the PC)
>2) Files/printers on both PCs by both PCs
>
>Looking at http://support.microsoft.com/kb/814985 , I believe that setup
>enable one-way sharing only, right? How could I make the sharing both ways,
>so the USB modem and files/printers to be shared could be moved from one PC
>to the other with no re-configuration?
>
>TCP/IP of LAN connections currently set up as follows:
>1) PC1
>1.1) IP 10.11.2.1
>1.2) subnet mask- 255.255.255.0
>1.3) default gateway- 10.11.2.2
>1.4) Workstation Name: PC1
>1.5) Workgroup Name: HOME
>
>2) PC2
>2.1) IP 10.11.2.2
>2.2) subnet mask- 255.255.255.0
>2.3) default gateway- 10.11.2.1
>2.4) Workstation Name: PC2
>2.5) Workgroup Name: HOME
>
>Observations
>1) On PC2, when I try to browse to \\10.11.2.1, it asks me for a username
>defaulting to PC1\guest (even with Guest account enabled on PC1 and password
>set/entered correctly, it wont let me in).
>2) On PC2, if I try to map to \\10.11.2.1 , logging on as PC1\AnyAdminUser
>it won't let me in either
>3) It takes a long time to browse the workgroup
>3) On PC2, it takes a long time to browse list of computers in HOME
>workgroup, only PC2 is listed
>4) On PC1, there is an error saying resources not available and no
>workstations are listed
>5) On PC1, it complained \\10.11.2.1 is not available when I try to browse
>to \\10.11.2.1
>
>Question- anything else I need to do to get Internet Connection shared
>(Besides taking the box on to enable it on the PC with USB Broadband modem
>installed)
>
>Furthermore, how could I configure the above if one of the PC is a Windows
>98 ?
I don't think that the Microsoft Knowledge Base article that you cite
applies to your network setup. It describes a connection between the
parallel ports of two computers. If I understand your question, you
have a connection between the Ethernet ports of two computers, using a
crossover Ethernet cable.
Run XP's Network Setup Wizard on both computers. It will make all the
right settings to enable them to share files, printers, and the
broadband Internet connection.
First, run the Wizard on the computer that has the USB modem
connection, which must run Windows XP, and configure it to share its
Internet connection:
1. Click Start | All Programs | Accessories | Communications | Network
Setup Wizard.
2. Specify the connection option "This computer connects directly to
the Internet. The other computers on my network connect to the
Internet through this computer".
3. If the other computer runs Windows 98, tell the Wizard to create a
setup diskette.
4. Let the Wizard run to completion.
Then, run the Wizard on the other computer:
1. If the other computer runs Windows 98, use the setup diskette.
2. If the other computer runs Windows XP, run the Wizard as above. If
the Wizard says that it has found a shared Internet connection on the
other computer, tell it to use the shared connection. Otherwise,
select the connection option "This computer connects to the Internet
through a residential gateway or through another computer on my
network".
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)
Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.
Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com
Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm
Similar Threads
Linear Mode
