Cosco 350 series bridge and outdoor connections

I need to setup an outdoor arrangements using a pair of these units
but I cannot seem to find any information to say if they will need to
be put in an enclosure or not.

If anyone can give me any guidenace on this I would be grateful ?


Drop the ZZZ to reply

Cheers ...

Hi Chris,

You may wish to investigate the Chatsworth Wireless Enclosure Design
and Installation Guide:

http://www.chatsworth.com/uploads/pd...LOSURES_WP.pdf

Additionally, scroll down to the bottom of the below web page to the
Chatworth Large Wireless Wall-Mount Enclosure.

Part Number: AAT-WME-P

Back plate is pre-drilled for the following wireless transmitter:

Cisco / Aironet 350 Rugged

http://www.chatsworth.com/catalog/section2/sec2pgV.asp

-------------------------------------------------------------------------------

Furthermore, you may wish to investigate LXE's NEMA 4 ENCLOSURE For
WLAN Access Points:

Model Number: NEMA4AM

Wireless Bridges Supported:

Cisco AIR-BR350-x-K9 / LXE Model 6723

Access Points Supported:

Cisco AIR-AP352E2R-x-K9 / LXE Model 6720
Cisco AIR-AP1220B-x-K9 / LXE Model 6730
Cisco AIR-AP1230B-x-K9 / LXE Model 6730

http://www.lxe.com/pdf/Nema_Enclosure.pdf

Should you need further assistance with quotes, etc. please call Reggie
Grant directly at:

U.S. Toll Free: 877-549-2680
International: 828-277-7272
http://www.bradreese.com/reggie-grant.htm

Hope this helps.

Brad Reese
BradReese.Com Cisco Repair Service Experts
http://www.bradreese.com/cisco-big-iron-repair.htm
1293 Hendersonville Road, Suite 17
Asheville, North Carolina USA 28803
U.S. Toll Free: 877-549-2680
International: 828-277-7272