Networking Forums

Networking Forums > Wireless Networking > Wireless Networks > Constantly have to repair network connection to access mapped driv

Reply
Thread Tools Display Modes

Constantly have to repair network connection to access mapped driv

 
 
Paul
Guest
Posts: n/a

 
      02-25-2010, 10:54 AM
Workgroup computers with mapped drives fail to reconnect after idle for 10-
15 minutes, I then have to "repair network connection" on the two other
computers, and the one I am working on, then everything works fine. The
network signal is always strong, internet is working and other rescources on
the network are all available. I just loose the access to the shared file on
the 2 other office computers until I "repair" connections. I getting tired
of yelling hey hit the repair again to my staff
 
Reply With Quote
 
 
 
 
Bob Lin \(MS-MVP\)
Guest
Posts: n/a

 
      02-25-2010, 06:14 PM
It may be autodisconenct issue. You may want to disable it. This link may
help.

Mapping IssuesTo modify idle time, at a command prompt using net config
server /autodisconnect: minutes. For example, to set the Autodisconnect
value to 30 minutes, ...
www.chicagotech.net/mapping.htm


--
Bob Lin, Microsoft-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Paul" <(E-Mail Removed)> wrote in message
news:109770AE-DC93-4C99-BE77-(E-Mail Removed)...
> Workgroup computers with mapped drives fail to reconnect after idle for
> 10-
> 15 minutes, I then have to "repair network connection" on the two other
> computers, and the one I am working on, then everything works fine. The
> network signal is always strong, internet is working and other rescources
> on
> the network are all available. I just loose the access to the shared file
> on
> the 2 other office computers until I "repair" connections. I getting tired
> of yelling hey hit the repair again to my staff


 
Reply With Quote
 
Jack [MVP-Networking]
Guest
Posts: n/a

 
      02-25-2010, 06:29 PM
Hi
If the Wireless SSID is Off, turn it On.
Make sure that all the computers Network card are set to wake on traffic.
If it does not help then disable the Powersaving of the Network card (I.e.
do not let them to go to Sleep).
Here is examples of this type of setting.
http://www.ezlan.net/example/powersave.jpg
http://www.ezlan.net/example/nic_wake.jpg
Jack (MS, MVP-Networking)



"Paul" <(E-Mail Removed)> wrote in message
news:109770AE-DC93-4C99-BE77-(E-Mail Removed)...
> Workgroup computers with mapped drives fail to reconnect after idle for
> 10-
> 15 minutes, I then have to "repair network connection" on the two other
> computers, and the one I am working on, then everything works fine. The
> network signal is always strong, internet is working and other rescources
> on
> the network are all available. I just loose the access to the shared file
> on
> the 2 other office computers until I "repair" connections. I getting tired
> of yelling hey hit the repair again to my staff


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off




1 2 3 4 5 6 7 8 9 10 11