connection is good, but no data transfer

I have a DSL connection backed up by dial-up. Neither
transfer data to Explorer or Outlook Express. When I run
the winipcfg and use the release all, renew all commands,
the connection finds and returns the IP addresses.
Likewise, the dial up connects at an acceptable speed. But
Outlook Express returns a cannot find server command,
Explorer returns a cannot dsiplay page error. Tyhe
connection is there, but it seems data is not being
conveyed from the netwrok card or modem to the
application. Any ideas?

OS ? firewall installed ?


"Don Silver" <(E-Mail Removed)> wrote in message
news:001a01c3bf38$9c7cbc40$(E-Mail Removed)...
> I have a DSL connection backed up by dial-up. Neither
> transfer data to Explorer or Outlook Express. When I run
> the winipcfg and use the release all, renew all commands,
> the connection finds and returns the IP addresses.
> Likewise, the dial up connects at an acceptable speed. But
> Outlook Express returns a cannot find server command,
> Explorer returns a cannot dsiplay page error. Tyhe
> connection is there, but it seems data is not being
> conveyed from the netwrok card or modem to the
> application. Any ideas?

Win 98SE, IE6, no firewall. Single PC connection.

>-----Original Message-----
>OS ? firewall installed ?
>
>
>"Don Silver" <(E-Mail Removed)> wrote in message
>news:001a01c3bf38$9c7cbc40$(E-Mail Removed)...
>> I have a DSL connection backed up by dial-up. Neither
>> transfer data to Explorer or Outlook Express. When I
run
>> the winipcfg and use the release all, renew all
commands,
>> the connection finds and returns the IP addresses.
>> Likewise, the dial up connects at an acceptable speed.
But
>> Outlook Express returns a cannot find server command,
>> Explorer returns a cannot dsiplay page error. Tyhe
>> connection is there, but it seems data is not being
>> conveyed from the netwrok card or modem to the
>> application. Any ideas?
>
>
>.
>

www.careyholzman.com/netfixes.htm

See Tip #18

Carey

"Don Silver" <(E-Mail Removed)> wrote in message
news:001a01c3bf38$9c7cbc40$(E-Mail Removed)...
> I have a DSL connection backed up by dial-up. Neither
> transfer data to Explorer or Outlook Express. When I run
> the winipcfg and use the release all, renew all commands,
> the connection finds and returns the IP addresses.
> Likewise, the dial up connects at an acceptable speed. But
> Outlook Express returns a cannot find server command,
> Explorer returns a cannot dsiplay page error. Tyhe
> connection is there, but it seems data is not being
> conveyed from the netwrok card or modem to the
> application. Any ideas?