Networking Forums

Networking Forums > Wireless Networking > Wireless Networks > Connected to networks but can't browse internet or email

Reply
Thread Tools Display Modes

Connected to networks but can't browse internet or email

 
 
Henners
Guest
Posts: n/a

 
      12-01-2004, 03:01 PM
Hello, I am a little bit unfamiliar with connecting the internet via a
wireless network, the wired networks I have connected to in the past seem to
have worked straight away.
Basically I have just bought a laptop running XP home with a built in Ralink
RT2500 wireless LAN card. I have achieved a connection to two networks- one
PC running Windows 2000 with an Apple Airport (which has a WiFi'd apple
notebook with working internet), and the 'Looseconnection' public WiFi in
Brighton.
I can connect to both networks and share folders with the Airport networked
PC, but whatever settings are selected in Explorer's connections properties,
I get 'The page cannot be displayed'.
I am going on the assumption that no Dial-up & Virtual Private Network
settings are added, and the LAN Settings are left unchecked apart from
Automatically detect settings (but it doesnt work with this unchecked either).

The laptop's firewall (ZoneAlarm) has been disabled, along with the PC's
(temporarily).
I have also tried combinations of checkboxes on the Wireless network key
(WEP) settings on the laptop's network card properties but to no success.
These default as all unchecked.
Any further suggestions would be greatly appreciated.
Thanks.
 
Reply With Quote
 
 
 
 
Henners
Guest
Posts: n/a

 
      12-01-2004, 03:09 PM
Sorry I didn't mention that I connected to the internet straight away when I
used the built in wired network card, its just the wireless connection that
doesnt like the internet.
 
Reply With Quote
 
Tanya
Guest
Posts: n/a

 
      12-01-2004, 08:56 PM
Check if you are using WZC(Wireless Zero Configuration), windows puts it on
automatic and started by default.
If you are using your wireless card software to manage the network then
disable and stop WZC, it is in Services.msc in Computer Management. If you
want to use Windows to configure your wireless make sure that is checked in
the card properties, in the network folder, and keep WZC enabled.
They can't be used at the same time. They will cancel each other out.
"Henners" <(E-Mail Removed)> wrote in message
news:BE2ED182-8187-4E58-A52F-(E-Mail Removed)...
> Sorry I didn't mention that I connected to the internet straight away when
> I
> used the built in wired network card, its just the wireless connection
> that
> doesnt like the internet.



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Send/receive email. Can't browse Mademgra Wireless Networks 2 05-25-2007 06:08 AM
Connected to wireless router, but can't connect to internet or email rangertark@hotmail.com Wireless Internet 4 12-11-2006 12:16 AM
connected to wireless network but can't browse internet malinky Wireless Networks 2 04-10-2006 12:51 AM
wireless connected but cannot browse web gg Wireless Networks 3 01-02-2006 04:08 PM
Says Internet Connected but No Web or EMail Access (pings ok thoug lenman74 Wireless Networks 0 11-01-2005 09:30 PM



1 2 3 4 5 6 7 8 9 10 11