On 8 Jan 2005 15:33:22 -0800,
(E-Mail Removed) wrote:
>I have a question. I have successfully installed a Dlink DWL900AP+,
>which repeates the Wireless Signal from my DWL614+ in my basement.
>
>Now I would like to connect to server PCs via Ethernet Cables to my
>repeater but I can't get a signal from the Ethernet outlet at my
>DWL900AP+. Do I need a special cable or need to buy an additional
>device?
Won't work. The DWL-900AP+ will not repeat anything from the ethernet
port. In fact, the ethernet port goes nowhere (other than the
internal web configuration pages) when in repeater mode.
Boxes that support WDS (wireless distribution something) will
simultaneously play repeater and access point, giving you what you
want. However, you'll also need to replace your DI-614+ as it will
not work with a WDS repeater.
The only way to make this work is to replace everything, or install
wireless card(s) in your server(s).
--
Jeff Liebermann
(E-Mail Removed)
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 AE6KS 831-336-2558