Confused on Entire Network

1 of my 2 Domain Controllers show only Microsoft Windows Network under the
Entire Network in Windows Explorer. The other DC and most of my client
machines show following the options under Entire Network;
Microsoft Terminal Services
Microsoft Windows Network
Web Client Network

Error after running dcdiag /e /v /c /fix /fC1106.txt I receive the
following;
Event ID: 10009
DCOM was unable to communicate with the computer 129.71.254.12 using any of
the configured protocols
Only on the JCDC01 DC the other DC JCDC02 seems to be fine.
but when I run netdom verify jcdc01 from either DC it verifys OK unless the
DC was just restarted. If I run netdom verify jcdc02 from either DC it
always failes with;
The command failed to complete successfully.
Help !

Hello JCCIT,

Have you checked your network settings, see here:
http://msdn.microsoft.com/library/de...kmsgs/4034.asp

To get further infos about this error see here:
http://support.microsoft.com/kb/910695/en-us

And here are still a lot of different infos about it, maybe one applies to
you:
http://www.eventid.net/display.asp?e...e=DCOM&phase=1

Best regards

myweb
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.



> 1 of my 2 Domain Controllers show only Microsoft Windows Network under
> the
> Entire Network in Windows Explorer. The other DC and most of my
> client
> machines show following the options under Entire Network;
> Microsoft Terminal Services
> Microsoft Windows Network
> Web Client Network
> Error after running dcdiag /e /v /c /fix /fC1106.txt I receive the
> following;
> Event ID: 10009
> DCOM was unable to communicate with the computer 129.71.254.12 using
> any of
> the configured protocols
> Only on the JCDC01 DC the other DC JCDC02 seems to be fine.
> but when I run netdom verify jcdc01 from either DC it verifys OK
> unless the
> DC was just restarted. If I run netdom verify jcdc02 from either DC
> it
> always failes with;
> The command failed to complete successfully.
> Help !