Configuring Multiple Internet Sources

Hey Guys -

I have 2 individual networks that I would like to connect to simultaneously.
They are on different subnets. When I enable both, I only have access to one
of the networks, when I bridge them, I have the same problem.

The only way to use both is to use one at a time and I have to disable the
one I don't want to use.

Is there a setting I can set so I can have both running simultaneously? I've
searched Google but I was unable to find anything.

Thanks for any help.

--Adam

Hello,

DO NOT MULTIPOST !

This is the answer i gave you on the other forum:

use print migrator to move printer and drivers from one server to another:
http://www.microsoft.com/downloads/d...displaylang=en

Vbscript at logon that remaps same printer but to the new server



--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com


"Adam S. Kirschner" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> Hey Guys -
>
> I have 2 individual networks that I would like to connect to
> simultaneously. They are on different subnets. When I enable both, I only
> have access to one of the networks, when I bridge them, I have the same
> problem.
>
> The only way to use both is to use one at a time and I have to disable the
> one I don't want to use.
>
> Is there a setting I can set so I can have both running simultaneously?
> I've searched Google but I was unable to find anything.
>
> Thanks for any help.
>
> --Adam
>

Sorry,
I obviously misclicked, it was for the post of DJone.

Please accept my apologies.


--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com


"Mathieu CHATEAU" <(E-Mail Removed)> wrote in message
news:OGP%(E-Mail Removed)...
> Hello,
>
> DO NOT MULTIPOST !
>
> This is the answer i gave you on the other forum:
>
> use print migrator to move printer and drivers from one server to another:
> http://www.microsoft.com/downloads/d...displaylang=en
>
> Vbscript at logon that remaps same printer but to the new server
>
>
>
> --
> Cordialement,
> Mathieu CHATEAU
> http://lordoftheping.blogspot.com
>
>
> "Adam S. Kirschner" <(E-Mail Removed)> wrote in message
> news:%(E-Mail Removed)...
>> Hey Guys -
>>
>> I have 2 individual networks that I would like to connect to
>> simultaneously. They are on different subnets. When I enable both, I only
>> have access to one of the networks, when I bridge them, I have the same
>> problem.
>>
>> The only way to use both is to use one at a time and I have to disable
>> the one I don't want to use.
>>
>> Is there a setting I can set so I can have both running simultaneously?
>> I've searched Google but I was unable to find anything.
>>
>> Thanks for any help.
>>
>> --Adam
>>
>

Hello,

You can't use both gateway at the same time through windows.

You may configure both on the same subnet like this:
pc: 192.168.0.1
gateway 1: 192.168.0.253
gateway 2: 192.168.0.254

If the first goes down (windows can't ping it anymore), it will switch to
the backup one.

Hope it helps,


--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com


"Adam S. Kirschner" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> Hey Guys -
>
> I have 2 individual networks that I would like to connect to
> simultaneously. They are on different subnets. When I enable both, I only
> have access to one of the networks, when I bridge them, I have the same
> problem.
>
> The only way to use both is to use one at a time and I have to disable the
> one I don't want to use.
>
> Is there a setting I can set so I can have both running simultaneously?
> I've searched Google but I was unable to find anything.
>
> Thanks for any help.
>
> --Adam
>

Thanks, this is useful.

Now for the next problem:

I'm using Windows Mobile's Internet Sharing to get online (the internet is
currently down in my office). Is it possible to change the gateway settings
on windows mobile so I can match my office's subnet? They are both
192.168.x.x

--Adam

"Mathieu CHATEAU" <(E-Mail Removed)> wrote in message
news:O$(E-Mail Removed)...
> Hello,
>
> You can't use both gateway at the same time through windows.
>
> You may configure both on the same subnet like this:
> pc: 192.168.0.1
> gateway 1: 192.168.0.253
> gateway 2: 192.168.0.254
>
> If the first goes down (windows can't ping it anymore), it will switch to
> the backup one.
>
> Hope it helps,
>
>
> --
> Cordialement,
> Mathieu CHATEAU
> http://lordoftheping.blogspot.com
>
>
> "Adam S. Kirschner" <(E-Mail Removed)> wrote in message
> news:%(E-Mail Removed)...
>> Hey Guys -
>>
>> I have 2 individual networks that I would like to connect to
>> simultaneously. They are on different subnets. When I enable both, I only
>> have access to one of the networks, when I bridge them, I have the same
>> problem.
>>
>> The only way to use both is to use one at a time and I have to disable
>> the one I don't want to use.
>>
>> Is there a setting I can set so I can have both running simultaneously?
>> I've searched Google but I was unable to find anything.
>>
>> Thanks for any help.
>>
>> --Adam
>>
>

You may post to the windows mobile forum, but i don't think you can have 2
gateway on windows mobile.

As it is an office, you may push the twon gateway trhough dhcp lease.

--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com


"Adam S. Kirschner" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Thanks, this is useful.
>
> Now for the next problem:
>
> I'm using Windows Mobile's Internet Sharing to get online (the internet is
> currently down in my office). Is it possible to change the gateway
> settings on windows mobile so I can match my office's subnet? They are
> both 192.168.x.x
>
> --Adam
>
> "Mathieu CHATEAU" <(E-Mail Removed)> wrote in message
> news:O$(E-Mail Removed)...
>> Hello,
>>
>> You can't use both gateway at the same time through windows.
>>
>> You may configure both on the same subnet like this:
>> pc: 192.168.0.1
>> gateway 1: 192.168.0.253
>> gateway 2: 192.168.0.254
>>
>> If the first goes down (windows can't ping it anymore), it will switch to
>> the backup one.
>>
>> Hope it helps,
>>
>>
>> --
>> Cordialement,
>> Mathieu CHATEAU
>> http://lordoftheping.blogspot.com
>>
>>
>> "Adam S. Kirschner" <(E-Mail Removed)> wrote in message
>> news:%(E-Mail Removed)...
>>> Hey Guys -
>>>
>>> I have 2 individual networks that I would like to connect to
>>> simultaneously. They are on different subnets. When I enable both, I
>>> only have access to one of the networks, when I bridge them, I have the
>>> same problem.
>>>
>>> The only way to use both is to use one at a time and I have to disable
>>> the one I don't want to use.
>>>
>>> Is there a setting I can set so I can have both running simultaneously?
>>> I've searched Google but I was unable to find anything.
>>>
>>> Thanks for any help.
>>>
>>> --Adam
>>>
>>
>
>