configuring the linux ppp client

RaviHolal

Guest

Posts: n/a

11-16-2006, 06:32 AM

hi

I am not able to configure linux(2.6.11) as
point-to-point(ppp)client, and vxWorks as Server. Here, I am using the
USB as the commnication channel. Here,USB Host stack is in the linux
side and USB Device stack is in vxWorks side. Can any one give the
solution for this.

the configuration file(options.ttyACM0) I am using is

lock
defaultroute
noipdefault
passive
noauth
crtscts
local
115200
asyncmap 0
connect 'chat -v -f /etc/ppp/scripts/winserver.chat'

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are Off Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
debian Lenny: forcing a IPv6 Router Sollicitation (configuring alinux isatap client)	Kristoff Bonne	Linux Networking	0	08-01-2008 09:32 AM
Trouble Installing Linux/Cisco VPN Client Has anyone had trouble compiling the linux cisco vpn client? Here is the output of the install script: # uname -rviosm Linux 2.4.22-1.2188.nptl #1 Wed Apr 21 20:19:18 EDT 2004 x86_64 x86_64 GNU/Linux	JSH	Linux Networking	4	07-02-2004 12:48 PM
Samba file timestamp policy with Linux client .vs. Windows client	Richard Conway	Linux Networking	2	03-05-2004 07:49 AM
linux neewbie : Configuring linux client in a windows network	MIke	Linux Networking	1	01-17-2004 06:11 PM
Configuring linux for NAT on virtual machine	Ger Moroney	Linux Networking	1	08-15-2003 01:48 PM