configuring (D-Link 614+) Wireless Performance features

To Whom It May Concern:



I have the D-Link 614+ A. If possible I would like to configure the
"Wireless Performance features" to improve the performance. Below are the
settings of my router.



These are the Wireless Performance features for the AP(Access Point)
Portion.

Beacon interval
100 (msec, range:1~1000, default:100)

RTS Threshold :
2432 (range: 256~2432, default:2432)

Fragmentation :
2346 (range: 256~2346, default:2346, even number only)

DTIM interval :
3 (range: 1~255, default:3)

Basic Rates :
1-2(Mbps) 1-2-5.5-11(Mbps) 1-2-5.5-11-22(Mbps)

TX Rates :
1-2(Mbps) 1-2-5.5-11(Mbps) 1-2-5.5-11-22(Mbps)

Preamble Type :
Short Preamble Long Preamble

Authentication :
Open System Shared Key Auto

SSID Broadcast :
Enabled Disabled

Antenna transmit power:
100% 17dBm50% 15dBm25% 12dBm12.5% 10dBm

4X Mode :
Enabled Disabled




Thanks



Aric

On Sun, 09 Nov 2003 21:52:26 +0000, Aric Lambert wrote:


> Antenna transmit power:
> 100% 17dBm50% 15dBm25% 12dBm12.5% 10dBm
>
> 4X Mode :
> Enabled Disabled

Interesting.. My 614 doesnt have the last 2 settings (still above)..
You must have updated the firmware.. (i havent done that yet)

DRACO-
--
In order to bend the spoon, you have to first
realize you are holding a butterknife!

To email me remove .not as it is an invalad TLD