http://www.practicallynetworked.com/
http://www.wown.com/
Troubleshooting guides can be found here.
--
Richard G. Harper (MVP Win9x)
(E-Mail Removed)
* PLEASE post all messages and replies to the newsgroup so all may
* benefit from the discussion. Private mail is usually not replied to.
Help US help YOU ...
http://www.dts-l.org/goodpost.htm
"D.H. Cesare" <(E-Mail Removed)> wrote in message
news:6dY8b.13141$(E-Mail Removed)...
Morning.
Win98 SE
500mHz
Netgear DS104 hub
I have completely restructured my adapters and protocols and closed port 135
on both computers. I'm using TCP/IP for Internet communication and NetBEUI
for intranet. Both firewalls are completely shut down (hoping that the
closed 135 port will allow protection). Before shutting down the firewalls,
I tried setting them to share network. Printers and file sharing is
enabled. 3 drives on "B" and 4 drives on "A" are set to FULL share. Both
machines have unique 8 digit names and both have the same workgroup name. I
logon to both.
What am I missing?
The "B" machine can see both A & B but can not access "A".
The "A" machine does not see either one.
Both computers access the internet with no problem.
What else am I missing?
--
^ ^ ^ ^ ^ ^
D.H. Cesare