frogman wrote:
> Let me be more specific
>
> I have 2 laptops running XP home with wireless cards
> I also 2 pc one running 2003 server and the other running XP pro
>
> I am using the DHCP on the router because I am going to setup a
> different server in the near future and get rid of my old server.
>
> One laptop connects fine
> The other connects to the router but has trouble acquiring a network IP
> address and it comes back with an IP that is not on my network
> (169.254.125.187). My network is 192.168.x.x. I have walked through
> all of the wireless network connection stuff and both laptops are the
> same.
>
> When I check the event viewer on the one lap it says:
> Your computer has automatically configured the IP address for the
> network card with network address 0014a485c5e3. The IP address being
> used is 169.254.125.187. My network is configured as 192.168.x.x
>
> Now the mac filtering I checked was on the router not the laptop, as I
> don't know where to check that on the laptop.
>
> I am sorry about the confusion.
> I posted this in the wrong group so I moved it to here.
> I left the stuff they helped me with in the post so we would not have
> to cover the same ground but I see now it is just confusing
>
>
> Thanks
>
Note that the 169... address is the XP default private IP when the
connection cannot be made. Also, did you specifically select your
wireless network? Right click the system tray connection icon and
select View Available Networks, then select yours. If the router is not
broadcasting SSID, turn that on. Some wireless NICs will not connect
unless SSID is broadcast.
MAC address filtering is set in the router. If it is enabled in the
router, then consult the router's DHCP client table for the MAC address
of the new NIC, enter it into the MAC filtering table, save the
properties to the router.
You can google for winsockxpfix.exe that will repair the tcp/ip stack.
You can also check the tcp/ip properties, advanced button, options tab,
tcp/ip filtering. Make sure all ports and protocols are set to Permit
All and not Permit Only, then disable filtering.
Q
|