Client computer on MN-100 does not conecting to the base

This topics depends on topic wich is below:
"MN-100. Client computer cannot conn."

Thank you for your time reading it...

I have tried everething. Today in the morning i come up
with an idea and i reinstalled my Linksys drivers and
seted up everething from the begining.
I come up with results as:
-Linksys drivers are working properly and they receiving
the Normal amount of packets from each other.
-After installing the base station:
a) Host computer installation: "succesfull"
b) Client computer installation: "unsuccesfull"
Client computer canno`t connect to the host computer,
but they see each other on local aeras conections and
Host computer`s workgroup is conected, but clients
workgroup is "not", but the local packets are receiving
in normal.
I have tried reinstalling my Base station on client, but
it cannot even finish, becouse it does not detect the
base station and Internet Connection ( yeterday i had
mallfunction of both drivers, but today i reinstalled it
and mallfunction is fixed, but it still canno`t detect
connection)
Any sugestions guys? Would be realy appreciate!

What is it you're trying to do exactly, and why are you installing Linksys
drivers with Microsoft's MN-100?
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"(E-Mail Removed)" <(E-Mail Removed)> wrote in
message news:f6f201c3f257$fd7bc750$(E-Mail Removed)...
>
> This topics depends on topic wich is below:
> "MN-100. Client computer cannot conn."
>
> Thank you for your time reading it...
>
> I have tried everething. Today in the morning i come up
> with an idea and i reinstalled my Linksys drivers and
> seted up everething from the begining.
> I come up with results as:
> -Linksys drivers are working properly and they receiving
> the Normal amount of packets from each other.
> -After installing the base station:
> a) Host computer installation: "succesfull"
> b) Client computer installation: "unsuccesfull"
> Client computer canno`t connect to the host computer,
> but they see each other on local aeras conections and
> Host computer`s workgroup is conected, but clients
> workgroup is "not", but the local packets are receiving
> in normal.
> I have tried reinstalling my Base station on client, but
> it cannot even finish, becouse it does not detect the
> base station and Internet Connection ( yeterday i had
> mallfunction of both drivers, but today i reinstalled it
> and mallfunction is fixed, but it still canno`t detect
> connection)
> Any sugestions guys? Would be realy appreciate!

Because my client computer has only one driver for
networking and it is a "Linksys".
So i connecting client computer from "Linksys" to
my "linksys" driver and it working properly.
Than i setting up my base station wich recieving
internet conection from my "Realtek" driver.
Than i "Bridge" the "-realtek-" with "-linksys-"!!!
(I`m reaping: "It was working that way for over 6
months")

Excuse me! Is there is any other way, to connect them?
Please share...

>-----Original Message-----
>What is it you're trying to do exactly, and why are you
installing Linksys
>drivers with Microsoft's MN-100?
>--
>Chris H.
>Microsoft Windows MVP
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>"(E-Mail Removed)"
<(E-Mail Removed)> wrote in
>message news:f6f201c3f257$fd7bc750$(E-Mail Removed)...
>>
>> This topics depends on topic wich is below:
>> "MN-100. Client computer cannot conn."
>>
>> Thank you for your time reading it...
>>
>> I have tried everething. Today in the morning i come
up
>> with an idea and i reinstalled my Linksys drivers and
>> seted up everething from the begining.
>> I come up with results as:
>> -Linksys drivers are working properly and they
receiving
>> the Normal amount of packets from each other.
>> -After installing the base station:
>> a) Host computer installation: "succesfull"
>> b) Client computer installation: "unsuccesfull"
>> Client computer canno`t connect to the host computer,
>> but they see each other on local aeras conections and
>> Host computer`s workgroup is conected, but clients
>> workgroup is "not", but the local packets are receiving
>> in normal.
>> I have tried reinstalling my Base station on client,
but
>> it cannot even finish, becouse it does not detect the
>> base station and Internet Connection ( yeterday i had
>> mallfunction of both drivers, but today i reinstalled
it
>> and mallfunction is fixed, but it still canno`t detect
>> connection)
>> Any sugestions guys? Would be realy appreciate!
>
>
>.
>

Then you're talking about something else, and Barb is addressing the issues
in your other thread. You should stick to one thread here.
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"(E-Mail Removed)" <(E-Mail Removed)> wrote in
message news:fd1901c3f25d$8e7f65e0$(E-Mail Removed)...
> Because my client computer has only one driver for
> networking and it is a "Linksys".
> So i connecting client computer from "Linksys" to
> my "linksys" driver and it working properly.
> Than i setting up my base station wich recieving
> internet conection from my "Realtek" driver.
> Than i "Bridge" the "-realtek-" with "-linksys-"!!!
> (I`m reaping: "It was working that way for over 6
> months")
>
> Excuse me! Is there is any other way, to connect them?
> Please share...
>
> >-----Original Message-----
> >What is it you're trying to do exactly, and why are you
> installing Linksys
> >drivers with Microsoft's MN-100?
> >--
> >Chris H.
> >Microsoft Windows MVP
> >Associate Expert
> >Expert Zone - www.microsoft.com/windowsxp/expertzone
> >
> >"(E-Mail Removed)"
> <(E-Mail Removed)> wrote in
> >message news:f6f201c3f257$fd7bc750$(E-Mail Removed)...
> >>
> >> This topics depends on topic wich is below:
> >> "MN-100. Client computer cannot conn."
> >>
> >> Thank you for your time reading it...
> >>
> >> I have tried everething. Today in the morning i come
> up
> >> with an idea and i reinstalled my Linksys drivers and
> >> seted up everething from the begining.
> >> I come up with results as:
> >> -Linksys drivers are working properly and they
> receiving
> >> the Normal amount of packets from each other.
> >> -After installing the base station:
> >> a) Host computer installation: "succesfull"
> >> b) Client computer installation: "unsuccesfull"
> >> Client computer canno`t connect to the host computer,
> >> but they see each other on local aeras conections and
> >> Host computer`s workgroup is conected, but clients
> >> workgroup is "not", but the local packets are receiving
> >> in normal.
> >> I have tried reinstalling my Base station on client,
> but
> >> it cannot even finish, becouse it does not detect the
> >> base station and Internet Connection ( yeterday i had
> >> mallfunction of both drivers, but today i reinstalled
> it
> >> and mallfunction is fixed, but it still canno`t detect
> >> connection)
> >> Any sugestions guys? Would be realy appreciate!
> >
> >
> >.
> >

What are you tolking about?
So!? Were should i go now?
>-----Original Message-----
>Then you're talking about something else, and Barb is
addressing the issues
>in your other thread. You should stick to one thread
here.
>--
>Chris H.
>Microsoft Windows MVP
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>"(E-Mail Removed)"
<(E-Mail Removed)> wrote in
>message news:fd1901c3f25d$8e7f65e0$(E-Mail Removed)...
>> Because my client computer has only one driver for
>> networking and it is a "Linksys".
>> So i connecting client computer from "Linksys" to
>> my "linksys" driver and it working properly.
>> Than i setting up my base station wich recieving
>> internet conection from my "Realtek" driver.
>> Than i "Bridge" the "-realtek-" with "-linksys-"!!!
>> (I`m reaping: "It was working that way for over 6
>> months")
>>
>> Excuse me! Is there is any other way, to connect them?
>> Please share...
>>
>> >-----Original Message-----
>> >What is it you're trying to do exactly, and why are
you
>> installing Linksys
>> >drivers with Microsoft's MN-100?
>> >--
>> >Chris H.
>> >Microsoft Windows MVP
>> >Associate Expert
>> >Expert Zone - www.microsoft.com/windowsxp/expertzone
>> >
>> >"(E-Mail Removed)"
>> <(E-Mail Removed)> wrote in
>> >message news:f6f201c3f257$fd7bc750$(E-Mail Removed)...
>> >>
>> >> This topics depends on topic wich is below:
>> >> "MN-100. Client computer cannot conn."
>> >>
>> >> Thank you for your time reading it...
>> >>
>> >> I have tried everething. Today in the morning i
come
>> up
>> >> with an idea and i reinstalled my Linksys drivers
and
>> >> seted up everething from the begining.
>> >> I come up with results as:
>> >> -Linksys drivers are working properly and they
>> receiving
>> >> the Normal amount of packets from each other.
>> >> -After installing the base station:
>> >> a) Host computer installation: "succesfull"
>> >> b) Client computer installation: "unsuccesfull"
>> >> Client computer canno`t connect to the host
computer,
>> >> but they see each other on local aeras conections
and
>> >> Host computer`s workgroup is conected, but clients
>> >> workgroup is "not", but the local packets are
receiving
>> >> in normal.
>> >> I have tried reinstalling my Base station on
client,
>> but
>> >> it cannot even finish, becouse it does not detect
the
>> >> base station and Internet Connection ( yeterday i
had
>> >> mallfunction of both drivers, but today i
reinstalled
>> it
>> >> and mallfunction is fixed, but it still canno`t
detect
>> >> connection)
>> >> Any sugestions guys? Would be realy appreciate!
>> >
>> >
>> >.
>> >
>
>
>.
>

Continue your thread in the MN-100 Client computer canno't connect to the
Network thread.
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"(E-Mail Removed)" <(E-Mail Removed)> wrote in
message news:f76f01c3f260$9cfe2770$(E-Mail Removed)...
> What are you tolking about?
> So!? Were should i go now?
> >-----Original Message-----
> >Then you're talking about something else, and Barb is
> addressing the issues
> >in your other thread. You should stick to one thread
> here.
> >--
> >Chris H.
> >Microsoft Windows MVP
> >Associate Expert
> >Expert Zone - www.microsoft.com/windowsxp/expertzone
> >
> >"(E-Mail Removed)"
> <(E-Mail Removed)> wrote in
> >message news:fd1901c3f25d$8e7f65e0$(E-Mail Removed)...
> >> Because my client computer has only one driver for
> >> networking and it is a "Linksys".
> >> So i connecting client computer from "Linksys" to
> >> my "linksys" driver and it working properly.
> >> Than i setting up my base station wich recieving
> >> internet conection from my "Realtek" driver.
> >> Than i "Bridge" the "-realtek-" with "-linksys-"!!!
> >> (I`m reaping: "It was working that way for over 6
> >> months")
> >>
> >> Excuse me! Is there is any other way, to connect them?
> >> Please share...
> >>
> >> >-----Original Message-----
> >> >What is it you're trying to do exactly, and why are
> you
> >> installing Linksys
> >> >drivers with Microsoft's MN-100?
> >> >--
> >> >Chris H.
> >> >Microsoft Windows MVP
> >> >Associate Expert
> >> >Expert Zone - www.microsoft.com/windowsxp/expertzone
> >> >
> >> >"(E-Mail Removed)"
> >> <(E-Mail Removed)> wrote in
> >> >message news:f6f201c3f257$fd7bc750$(E-Mail Removed)...
> >> >>
> >> >> This topics depends on topic wich is below:
> >> >> "MN-100. Client computer cannot conn."
> >> >>
> >> >> Thank you for your time reading it...
> >> >>
> >> >> I have tried everething. Today in the morning i
> come
> >> up
> >> >> with an idea and i reinstalled my Linksys drivers
> and
> >> >> seted up everething from the begining.
> >> >> I come up with results as:
> >> >> -Linksys drivers are working properly and they
> >> receiving
> >> >> the Normal amount of packets from each other.
> >> >> -After installing the base station:
> >> >> a) Host computer installation: "succesfull"
> >> >> b) Client computer installation: "unsuccesfull"
> >> >> Client computer canno`t connect to the host
> computer,
> >> >> but they see each other on local aeras conections
> and
> >> >> Host computer`s workgroup is conected, but clients
> >> >> workgroup is "not", but the local packets are
> receiving
> >> >> in normal.
> >> >> I have tried reinstalling my Base station on
> client,
> >> but
> >> >> it cannot even finish, becouse it does not detect
> the
> >> >> base station and Internet Connection ( yeterday i
> had
> >> >> mallfunction of both drivers, but today i
> reinstalled
> >> it
> >> >> and mallfunction is fixed, but it still canno`t
> detect
> >> >> connection)
> >> >> Any sugestions guys? Would be realy appreciate!
> >> >
> >> >
> >> >.
> >> >
> >
> >
> >.
> >