http://cgi.ebay.com/ws/eBayISAPI.dll...tem=5714411219
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=5714411219
Quick Features:
a.. Combined with the Cisco 2600 and 3600, the WIC-1AM card
provides:
b.. An integrated solution for ease of deployment and management
c.. Enhanced remote management capabilities
d.. A cost-effective alternative to leased lines or ISDN
e.. On-demand dial backup for critical WAN links
f.. Internal analog modem dialup capability-Internal modems allow
simple setup of a remote router. There is no separate external power, no
cables, and everything is in one chassis.
g.. Support for speeds up to 56K (V.90 specification)-When dialing
out to a digital endpoint, this feature allows users to achieve maximum data
transfer rates, equating to faster file transfers, speedier Web access, and
faster e-mail downloads.
h.. Cisco IOS Dial Access Software-Cisco IOS Software provides a
broad range of features for remote router management and dial backup,
including:
i.. Reverse Telnet support for LAN-based dial-out and fax-out
j.. Point-to-Point Protocol (PPP), Multilink PPP (MLPPP), and Serial
Line Internet Protocol (SLIP)TACACS+, Radius, and PPP password security
k.. Auto-sensing Internetwork Packet Exchange (IPX), Transmission
Control Protocol/IP (TCP/IP), AppleTalk Remote Access (ARA), and AppleTalk
Control Protocol (ATCP)
Product Overview:
One- and two-port analog modem WAN Interface Cards (WIC-1AM and
WIC-2AM) are designed for the award-winning Cisco 2600 and 3600 Series
modular router platforms. The addition expands the already extensive range
of WAN Interface Cards currently available for these routers. The interface
cards provide cost-effective basic telephone service connectivity to allow
remote router management, asynchronous Dial-on-Demand Routing (DDR) and dial
backup, dial- and fax-out modem access, and low-density remote access server
(RAS) services. Combined with the differentiated services delivered through
Cisco IOS Software, the Cisco 2600 and 3600 Series routers offer customers
best-of-breed scalability, flexibility, and investment protection, all in
cost-effective, multifunctional platforms. Both cards feature dual RJ-11
connectors, which are used for basic telephone service connection. The
WIC-1AM uses one port for connection to a standard telephone line, and the
other port can be connected to a basic analog telephone for use when the
modem is idle.
Detailed Specifications:
Device Type Modem (analog)
Enclosure Type Plug-in module
Dimensions (WxDxH) 2.7 in x 3.9 in x 0.7 in
Weight 2.4 oz
Max Transfer Rate 56 Kbps
Protocols & Specifications Bell 103, ITU V.21, Bell 212A, ITU
V.22, ITU V.22bis, ITU V.29, ITU V.32, ITU V.32bis, ITU V.34, ITU V.17, ITU
V.23, ITU V.27ter, k56Flex, ITU V.34bis, ITU V.33 , Hayes AT command set
Fax Compatibility G3
Max Fax Transfer Rate 14.4 Kbps
Error Correction Protocol MNP-4, ITU V.42, MNP-2, MNP-3
Data Compression Protocol MNP-5, ITU V.42bis
System Requirements Cisco IOS
NEW RETAIL IN BOX!!!
FREE SHIPPING & HANDLING including insurance— sent USPS Priority Mail!
Similar Threads
Linear Mode
