In article <K_Roc.1141$So1.844@newsfe1-win>, "trevor.appleton"
(E-Mail Removed) says...
> Despite putting Cisco 803 back on EBay, I thought I'd have ago following
> advice from Rob Morley and Lurch.
>
> Have got as far as finding the way of getting the break point and getting
> the following
>
> boot# set
> set baud =9600
> set data-bits =8
> set parity =none
> set stop-bits =1
> set console-flags =0
> set mac-address =0050.7307.C329
> set unit-ip =10.200.40.65
> set serv-ip =255.255.255.255
> set netmask =255.255.252.0
> set gate-ip =10.200.40.1
> set pkt-timeout =8
> set tftp-timeout =16
> set boot-action =flash
> set file-name ="c800-nsy6-mw.122-10b.bin"
> set watchdog =off
> set prompt ="boot"
> set ios-conf =0x2102
>
>
> unfortunately setting ios-conf to 141 or 142 and then typing boot at the
> boot#
> prompt results in "no such file" both times
>
Whoops - time to find a proper Cisco expert, I think :-(