Cisco Aironet 340 Series PCMCIA / HPC2000

Just a stab in the dark here to see if anyone uses this card, or 350 series,
with HPC2000 (StrongArm) and has come across a compatible SSID survey tool.

In case anyone deja's any of these keywords in the future; Spent a good part
of tonight evaluating different firmware/client combinations. If you want
the features of a newer client, yet want to maintain the functionality of
the ROM drivers for PnP in case of an unexpected mobile hard reset, I found
the following combo works great for both.

Firmware Version 4.25.30
[ No longer on Cisco's site, but can still be found at
http://ecomputing.med.harvard.edu/downloads.asp ]

Aironet Client Utility 2.30.11
[ Still available on Cisco's site. You'll need to register to download. ]

"Eric" wrote in message ...
> Just a stab in the dark here to see if anyone uses this card, or 350
series,
> with HPC2000 (StrongArm) and has come across a compatible SSID survey
tool.
>
> In case anyone deja's any of these keywords in the future; Spent a good
part
> of tonight evaluating different firmware/client combinations. If you want
> the features of a newer client, yet want to maintain the functionality of
> the ROM drivers for PnP in case of an unexpected mobile hard reset, I
found
> the following combo works great for both.
>
> Firmware Version 4.25.30
> [ No longer on Cisco's site, but can still be found at
> http://ecomputing.med.harvard.edu/downloads.asp ]
>
> Aironet Client Utility 2.30.11
> [ Still available on Cisco's site. You'll need to register to download. ]
>

Oh, the specific model of the card I'm using is AIR-PCM342US.

The PCM342 had a number of changes from previous 340 cards, so earlier cards
may not play nice with the above cocktail.