Cisco 677

Hi
Anyone know if Cisco 677 is compatible with UK ADSL, specifically Zen or
Nildram?
(I'm guessing most is the same, since it's all over BT lines, but still)
Thanks,
Jens Andersen

"Jens Andersen" <(E-Mail Removed)> wrote:

> Hi
> Anyone know if Cisco 677 is compatible with UK ADSL, specifically Zen or
> Nildram?
> (I'm guessing most is the same, since it's all over BT lines, but still)
> Thanks,
> Jens Andersen
>

Hi,
Can't help personally, as I know nthing about cisco routers, but take a
look at this thread on google http://makeashorterlink.com/?V303541C5
apparently it is possible.

--

Martin

Martin Cooper wrote:

> "Jens Andersen" <(E-Mail Removed)> wrote:
>
>> Hi
>> Anyone know if Cisco 677 is compatible with UK ADSL, specifically Zen or
>> Nildram?
>> (I'm guessing most is the same, since it's all over BT lines, but still)
>> Thanks,
>> Jens Andersen
>>
>
> Hi,
> Can't help personally, as I know nthing about cisco routers, but take
> a
> look at this thread on google http://makeashorterlink.com/?V303541C5
> apparently it is possible.
>
Try www.cisco.com and you find that it's an old router and is no longer
supported .A cisco 837 will work with uk adsl as it supports pppoa .
--
Ian G

Outgoings Certified Microsoft free
Checked with Suse 8.2

http://www.ee.ucl.ac.uk/~jsp/Cisco677.html




On Sun, 31 Aug 2003 14:20:43 +0200, "Jens Andersen"
<(E-Mail Removed)> wrote:

>> Try www.cisco.com and you find that it's an old router and is no longer
>> supported .A cisco 837 will work with uk adsl as it supports pppoa .
>> --
>> Ian G
>I am aware of this, however the reason I ask is that I have the opportunity
>to get a Cisco 677 for around £20, hence making it cheaper than even a
>standard USB modem.. Assuming it works with UK Adsl of course.
>But It seems it does, as long as I can get a hold of the right cbos.
>Thank you,
>Jens Andersen
>

John <postmaster@127.0.0.1> wrote in message news:<(E-Mail Removed)>...
> On Sun, 7 Sep 2003 18:45:03 +0100, "Jens Andersen"
> <(E-Mail Removed)> wrote:
>
>
> >Looking at your version output makes me wonder.
> >Could your problem has something to do with http://tinyurl.com/lswl perhaps?
> >Lack of upgrade of the ADI software...
>
> Been there and tried it and it didn't work. I tried up to
> 2.4.7something. and only my combination works.
>
>
> read http://www.ee.ucl.ac.uk/~jsp/Cisco677.html
>
> Important - downgrade the firmware before you downgrade the IOS

Hi John.
Would it be possible you could send me this firmware (i.e. cbos).
I have the correct DMT FULL(ADI) firmware so that shouldn't be a
problem.
I can currently get it to train without problems (with pretty much any
version, including 2.4.7) but no packets through just like on the site
you mention.
I'm guessing this means it should work with the correct firmware. (It
sounds like the people that couldn't get it to work at all couldn't
even get it to train....)
Thanks in advance,
Jens Andersen