Changed ip address

I changed my Ip address. How can I access the base
station? Management tool and 192.168.2.1 are unavailable

Hi,

Did you change the IP address of your Base Station or on your computer?
If you changed the IP address of the Base Station then you'll have to enter
the new IP address of the Base Station to access it. If you changed the IP
address of your computer you should still be able to access the Base Station
at http://192.168.2.1


--
Gary Tsang
Microsoft MVP - Windows XP Shell/User
http://www.microsoft.com/mvp

Protect Your PC: 3 steps to help ensure your PC is protected
Microsoft wants to help ensure your PC is protected from the latest
Blaster virus, as well as from future threats. Please go to
www.microsoft.com/protect and follow these steps today.

1. Use an Internet Firewall
2. Update Your Computer
3. Use Up-to-Date Antivirus Software

To get more information and resources about how to help protect
your PC, go to http://www.microsoft.com/protect
"Chubb" <(E-Mail Removed)> wrote in message
news:175f01c48c57$cb3a1040$(E-Mail Removed)...
>I changed my Ip address. How can I access the base
> station? Management tool and 192.168.2.1 are unavailable
>

That depends on the following information.

1) The IP address of the basestation.
2) The Subnet mask of the basestation which should be a 255.255.255.0
address
3) The IP address of your computer
4) The Subnet mask of your computer

If both the computer & device have the same subnet mask & both are on
the same network (the default is 192.168.2.1-254), the you can connect
to the router to configure it. However if you don't know what the IP
address is of the router you will need to do a factory reset to be able
to configure it. Of course if it has the DHCP server enabled you can
just browse to the IP address of the default gateway as that should be
the router.

Chubb wrote:

> I changed my Ip address. How can I access the base
> station? Management tool and 192.168.2.1 are unavailable
>