Can't type IP Address in Network Control Panel

I've added a NIC to this Win98 machine which I want to add
to a workgroup using a fixed IP address. When I click on
Specify an IP address, I can't get the "IP Address:" field
to get focus. Nor the subnet mask. No flashing cursor;
nothing. If I type in the field, I get a bell. I can
switch between "Obtain" & "Specify" easily. There is a
dial-up adapter also installed. Any suggestions?

"Paul Newman" <(E-Mail Removed)> wrote in message
news:189af01c44c2e$87d6bba0$(E-Mail Removed)...
> I've added a NIC to this Win98 machine which I want to add
> to a workgroup using a fixed IP address. When I click on
> Specify an IP address, I can't get the "IP Address:" field
> to get focus. Nor the subnet mask. No flashing cursor;
> nothing. If I type in the field, I get a bell. I can
> switch between "Obtain" & "Specify" easily. There is a
> dial-up adapter also installed. Any suggestions?

That is caused by the fonts not fitting in the IP number input boxes. Try
these:

1. Reset your desktop theme and screen item sizes to Windows Default (small
fonts)
2. If the above fails try upgrading your video drivers.

--
Paul Chitescu
(E-Mail Removed) http://pchitescu.null.ro/ ICQ:22641673
Any spammers will be painfully squeezed into /dev/null