Cant see other computer in workgroup

I have two computers running windows xp pro.

Both firewalls are disabled

Am using 2 wireless pci adapters, set up in a ad hoc peer to peer network to
which the both successfully connect

Both PCs are members of the same workgroup

On each PC in the workgroups folder, it does not show the other pc in the
workgroup!

How can this be corrected?

I believe you might need to enable NetBIOS over TCP/IP for that to work and
it may take up to 15 minutes for it to appear.

On the PC right click on the NIC in Network Connections | then Properties |
Scroll down to Internet Protocol highlight it, then click properties | Click
Advance | Click WINS (tab) | Check "Enable NetBIOS over TCP/IP" | Click OK |
Click OK | Click Close | Click X

--
David Hettel

Please post any reply as a follow-up message in the news group for everyone
to see. I'm sorry, but I don't answer questions addressed directly to me in
E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com

DISCLAIMER: This posting is provided "AS IS" with no warranty of any kind,
either expressed or implied, made in relation to the accuracy, reliability
or content of this post. The author shall not be liable for any direct,
indirect, incidental or consequential damages arising out of the use of, or
inability to use, information or opinions expressed in this post and confers
no rights.



"rrvolk" <(E-Mail Removed)> wrote in message
news:BBB0F1A3-D7C1-4B7C-B4F8-(E-Mail Removed)...
>I have two computers running windows xp pro.
>
> Both firewalls are disabled
>
> Am using 2 wireless pci adapters, set up in a ad hoc peer to peer network
> to
> which the both successfully connect
>
> Both PCs are members of the same workgroup
>
> On each PC in the workgroups folder, it does not show the other pc in the
> workgroup!
>
> How can this be corrected?
>

Hi
Successful Sharing involves some general consideration in Network settings,
http://www.ezlan.net/sharing.html
As well as specific adjustment of each computer according to what is allowed
to be shared.
http://support.microsoft.com/default...b;en-us;304040
Jack (MVP-Networking).VP-Networking).

"rrvolk" <(E-Mail Removed)> wrote in message
news:BBB0F1A3-D7C1-4B7C-B4F8-(E-Mail Removed)...
> I have two computers running windows xp pro.
>
> Both firewalls are disabled
>
> Am using 2 wireless pci adapters, set up in a ad hoc peer to peer network
to
> which the both successfully connect
>
> Both PCs are members of the same workgroup
>
> On each PC in the workgroups folder, it does not show the other pc in the
> workgroup!
>
> How can this be corrected?
>

That got me a little further , now in the workgroup:

computer A can only see computer A

computer B can see computer A and Computer B, but computer B gets "access
denied errors" when trying to access computer A.

Both systems have the "Computer Browser" Service running.

What would cause this?

"David Hettel" wrote:

> I believe you might need to enable NetBIOS over TCP/IP for that to work and
> it may take up to 15 minutes for it to appear.
>
> On the PC right click on the NIC in Network Connections | then Properties |
> Scroll down to Internet Protocol highlight it, then click properties | Click
> Advance | Click WINS (tab) | Check "Enable NetBIOS over TCP/IP" | Click OK |
> Click OK | Click Close | Click X
>
> --
> David Hettel
>
> Please post any reply as a follow-up message in the news group for everyone
> to see. I'm sorry, but I don't answer questions addressed directly to me in
> E-mail or news groups.
>
> Microsoft Most Valuable Professional Program
> http://mvp.support.microsoft.com
>
> DISCLAIMER: This posting is provided "AS IS" with no warranty of any kind,
> either expressed or implied, made in relation to the accuracy, reliability
> or content of this post. The author shall not be liable for any direct,
> indirect, incidental or consequential damages arising out of the use of, or
> inability to use, information or opinions expressed in this post and confers
> no rights.
>
>